928 RS Concept Sketch
#331
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looks like the concept spoiler from Porsche and what I had in mind for Just Peachy. Sorry my sketching is not up to your level. Very well done Matt, looks tremendous
T
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
#332
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
look good to me. We've both come a long way and will be nervous to drive these cars. Talk to you soon.-Matt
#333
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Not 100% sure where it goes on an '83, but I'd ASSume it's on the inside of the fuel door (?), as on my '90:
It'll add weight!![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
It'll add weight!
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
![](https://webfiles.uci.edu/redwards/public/Tire%20size%20and%20pressure%20%232.jpg)
#334
Drifting
Thread Starter
#335
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Not looking for slaps on the back, but wanted to share these. Coming together and getting cold out there. This car has taken on a whole new persona.
Can't wait to run her through the gearset.
Hatch strut parts are all Porsche, the clip is a left over (bent to shape) bit from my
sunroof mechanism.
Can't wait to run her through the gearset.
Hatch strut parts are all Porsche, the clip is a left over (bent to shape) bit from my
sunroof mechanism.
#336
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Gonna be a windy drive down to Frenzy with no glass!
#337
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Matt, the contour on the upper surface of the ducktail is Schweet. Great details!
#338
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
BTW, tire pressure sticker for 78-84 is 928 006 508 00. The latest PPN list I have lists it as still available, price of 16.94, but I don't know if that's REALLY still available. Roger or Mark would know.
#339
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
LOL, but I can't go. Too behind with work and i can tell by her expression that my Wife's not having it! She doean't quite understand.
Next year i'll be there Shawn. Maybe I'll see you around when you're down this way. -Matt
Thanks Rob, appreciate the help. I just put the doors on. They're so light. It made me think of the first car i restored when i was about 21 years old. It was a '64 VW
Karmann Ghia conv., and the 928 doors are much lighter than even that old VW's. That old VW would do 120mph when my Brother and I were done.
High compression and Web Cam with dual down drafts. Was a lot of fun and I met my Wife while
driving it.
Next year i'll be there Shawn. Maybe I'll see you around when you're down this way. -Matt
Karmann Ghia conv., and the 928 doors are much lighter than even that old VW's. That old VW would do 120mph when my Brother and I were done.
High compression and Web Cam with dual down drafts. Was a lot of fun and I met my Wife while
driving it.
#341
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Craig but it's got its defects that will need touch up. I try not to go postal anymore over them.
DIYers: rear bumper cover installation
If you find yourself doing this have twp helpers hold it while you plug in the electrics.
Then secure the 4 threshold trim screws (aluminum trim piece under the hatch)
Then secure the top corners of the rear bumper cover (8mm attachment lock nuts) while putting upward and outward pressure on the cover to get the corners tight.
Work your way down doing the same.
Putting the door hardware (locks etc) in tonight and hopefully the headlight assembly which has been repainted satin black after being lightened.
Thanks again Craig. -Matt
DIYers: rear bumper cover installation
If you find yourself doing this have twp helpers hold it while you plug in the electrics.
Then secure the 4 threshold trim screws (aluminum trim piece under the hatch)
Then secure the top corners of the rear bumper cover (8mm attachment lock nuts) while putting upward and outward pressure on the cover to get the corners tight.
Work your way down doing the same.
Putting the door hardware (locks etc) in tonight and hopefully the headlight assembly which has been repainted satin black after being lightened.
Thanks again Craig. -Matt
#342
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
4-1/2 hours, just the simplified door lock mechanism, rear running lights and headlight mechanism. But i did upgrade to 80/100W H4s finally which will be nice
at night. I can't wait to look over the hood at night.
I have to respray the door handles and gas cap cover door they had a few
tiny dark specks in them. The inner hatch drill holes can be seen with the hatch closed.
I really like this Porsche now!
Fenders tomorrow night.
at night. I can't wait to look over the hood at night.
I have to respray the door handles and gas cap cover door they had a few
tiny dark specks in them. The inner hatch drill holes can be seen with the hatch closed.
I really like this Porsche now!
Fenders tomorrow night.