John Speake

You have a switched 12v feed for the WBO2 from the harness I provide...... the same feed that normally goes to the NBO2. You can tap into that. It is fed from the fuel pump relay, so if you need to free air recalibrate the WBO2 you can bridge the FP relay for that.

killav

Thanks John, I think you have told me this before but I had forgot.

LauraV

That's what she said......?

That just aint right.

SeanR

Peanut Butter Jelly Time?

killav

I took a quick video on my way to the get together this morning. Traffic was a little heavy so I wasn't able to wring it out much but its better than nothing.....

I recently scored a good deal on some 30lb injectors that I couldn't pass up, so I am on the tuning merry go wheel again......




http://www.youtube.com/watch?v=z_Fs8qNrKHM

atb

Equally impressive to your RMT install is the fact that your PRNDL lights work.

Tony

no doubt. Mine have NEVER worked....fix'n them this summer.


The boost comes on nice! If you get tired of the gauges on the pillar like that you can mount them all on the parcel tray under the pod. After a while you will get the car sorted to the point you dont need to have them in plain sight all the time.

killav

Only R and 2 worked when I first got the car!!

Jaeger

Where is the air filter again on this kit? It looks from the bumper like there is no filter. WTF?!? I am only thru 3 pages so far on this thread.
Ya-ya-ya I know the particles would have to go in reverse to find the inlet, but murphy's law would take care of that detail real fast!!!

killav

You can see a picture of the filter in post #73.

killav

I let my son, who turned 16 in February, drive my car for the first time yesterday. He drove it from just south of Fort Worth all the way to Waco, probably 70 miles or so. He did a great job and really liked driving the car.

SeanR

You need to work on that alignment.

killav

Ha ha. The car tracks straight as an arrow. He was in a ...... wait, why am I fanning your flames!!

Randy V

I'm guessing he was referring to the steering wheel not being centered.

Duh.

killav

No I got what he was saying LOL. Sean and I go way back.....but he was in a turn!!