CPRacing: New 928 Products....?
#61
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
When new, that liner is very flexible and easy to remove from the receiver.
#62
+ 1 Air intake.
+1 Plastic mirrors.
Plastic sunroof
Reinforced Plastic Doors (for the racers)
Plastic front fenders.
Plastic or cf hood.
Bernhard
http://www.928.dk
Porsche 928 '87 Slantnose,
X-Over,Cats,Rmb
+1 Plastic mirrors.
Plastic sunroof
Reinforced Plastic Doors (for the racers)
Plastic front fenders.
Plastic or cf hood.
Bernhard
http://www.928.dk
Porsche 928 '87 Slantnose,
X-Over,Cats,Rmb
#64
Rennlist Member
Quote:
Originally Posted by Jim M.
Like this one!
What is the story behind this? Looks awesome!
__________________
Nicole
Originally Posted by Jim M.
Like this one!
What is the story behind this? Looks awesome!
__________________
Nicole
I built this one out of hand layed fiberglass. I got the idea from some old testing by Louie Ott and Ken Porken's use of a flexible rubber of some sort. Took me about 40 hours of sanding and laying up new FG. The Porsche hood crest is just to finish it off. Have not done any temperture comparisons, but it's almost always just warm to the touch after running, where as the aluminum piece I had before that would burn your hand after a good run.
#65
Owns the Streets
Needs Camber
Lifetime Rennlist
Member
Needs Camber
Lifetime Rennlist
Member
IR temp gun.
Maybe after good run with or without cooling chin for the intake oval horns, pop filter cover and take temp of the air filter.
#66
The Parts Whisperer
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#69
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#73
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,533
Received 1,674 Likes
on
1,087 Posts
[picture]vendors-head-explodes.gif[/picture]
#74
Nordschleife Master
My wants;
Front race air splitter
Rear quarter windows and rear hatch glass replacement (complete with mounting hardware) (lexan or other material)
Thanks for asking
Front race air splitter
Rear quarter windows and rear hatch glass replacement (complete with mounting hardware) (lexan or other material)
Thanks for asking
#75
Instructor
Join Date: May 2007
Location: Burbank, CA
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
splitter me timbers too
I second, third, fourth, or whatever, my interest in a front splitter particularly for a S model. (Although I would consider one for my 2 89's also....)