When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[Quote = MattiasH; 17149093] No es que sea fácil de cambiar con el motor todavía en el coche, pero no imposible [/ quote].
Is that the oil valve in the cylinder head? The one on the right side to which model does it correspond? Did not know her
It is the pressure relief valve from 944 S2. 944.107.139.00
I made a tool from a screw and a washer, to be able to remove the ball seat.
Those of the 928 32v and 944 s2 and 968 are not similar?
The 944 S2 valve has a lower pressure rating, 3 Bar compared to 5 Bar, if I remember correctly. This should reduce the amount of oil in the heads, to reduce the risk of oil starvation. This modification was recommended by Porsche for 928 used for racing. I will do this and install an accusump and hope for the best. Drysump is not fitting my budget, sadly.
Light gray, AKA pastel gray. Porsche called it raspberry at some point. The pic I posted above is a little washed out but I think it would look great in the Brumos car.