Invitation - Timing Belt Party
#32
Addict
Rennlist Member
Rennlist Member
Rich,
The plan is to use the existing roll bar in the cage. It'll need to be
modified since I'm going for a welded in cage. As for seats, I don't
know yet, I'm working with Marc on that. They need to be FIA
certified, so I won't be able to get the reclining seats I'd like.... I'll
have to make sure I can fit in the car with the helmet on.
Bill,
I'm pretty flexible this weekend. I was going to try and get in few
hours on Saturday, probably 1-5, then if I didn't finish go back on
Sunday. I've got to install the bracket on the belly pan, install the
clamps on the new Cats, remove the rear seats and door panels.
I'll have to remove the roll bar to get to the reat seats. I'll probably
also remove the passenger seat (until I get the new seats). This
is a big step. It'll be hard to get the car back to stock after this...
The plan is to use the existing roll bar in the cage. It'll need to be
modified since I'm going for a welded in cage. As for seats, I don't
know yet, I'm working with Marc on that. They need to be FIA
certified, so I won't be able to get the reclining seats I'd like.... I'll
have to make sure I can fit in the car with the helmet on.
Bill,
I'm pretty flexible this weekend. I was going to try and get in few
hours on Saturday, probably 1-5, then if I didn't finish go back on
Sunday. I've got to install the bracket on the belly pan, install the
clamps on the new Cats, remove the rear seats and door panels.
I'll have to remove the roll bar to get to the reat seats. I'll probably
also remove the passenger seat (until I get the new seats). This
is a big step. It'll be hard to get the car back to stock after this...
#33
928 Barrister
Rennlist Member
Rennlist Member
I have a committment for Saturday in Alameda and my transmission/TT is coming out tomorrow, along with the A arms and rack. So I guess I will have to sit this one out. I hope I will get the car back for the drive the following weekend to Big Sur and Carmel. Happy wrenching.
#34
Rennlist Member
Looks like I'm in for the 12th. Beth, please PM or post directions. I'm assuming an early start and a long day.
Nicole, can you bring that wire brush along? I don't think I'll be in the east bay before the 12th.
Bill, at this rate you're going to have to change your last name to "Belt"
Sounds like a great time! Oh, and did someone say "cookies"?
Nicole, can you bring that wire brush along? I don't think I'll be in the east bay before the 12th.
Bill, at this rate you're going to have to change your last name to "Belt"
Sounds like a great time! Oh, and did someone say "cookies"?
#35
Burning Brakes
Thread Starter
Join Date: Apr 2003
Location: Napa, Ca
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Ron and Joe - bummer. George - hope to see you. And cool Dave - yes, there will be cookies. What are your favorites. Hey any other food or drink requests? Don't be shy - lord knows I'm not!
I will be either posting or PM'ing directions soon.
And dang it, I forgot my list of parts that I have. I'll try to remember again tomorrow.
So as it stands, it looks like we have Bill, Nicole, Geoff, Dave, and of course me and Rich.
Maybe's are Steve, Richard (Monterey one) and George.
Looking good!
Now if anyone gets bored with the belt we have other issues with the '85 that maybe you guys want to play with:
Lighting issues - right side of car running lights are out.
Fuse panel glitches (Dave - this one is calling you)
Blower motor - newly replaced but only works on "high" - really weird.
Rear hatch release
Interior repair (aren't you an expert at this Nicole?)
Slight miss at idle
Only if you are interested. And of course I'm sure some of you will be bringing problems with you also.
Rich and I have a ton of tools. Any special one's we might not have or want me to check on?
Man, I can't wait!!!!!
I will be either posting or PM'ing directions soon.
And dang it, I forgot my list of parts that I have. I'll try to remember again tomorrow.
So as it stands, it looks like we have Bill, Nicole, Geoff, Dave, and of course me and Rich.
Maybe's are Steve, Richard (Monterey one) and George.
Looking good!
Now if anyone gets bored with the belt we have other issues with the '85 that maybe you guys want to play with:
Lighting issues - right side of car running lights are out.
Fuse panel glitches (Dave - this one is calling you)
Blower motor - newly replaced but only works on "high" - really weird.
Rear hatch release
Interior repair (aren't you an expert at this Nicole?)
Slight miss at idle
Only if you are interested. And of course I'm sure some of you will be bringing problems with you also.
Rich and I have a ton of tools. Any special one's we might not have or want me to check on?
Man, I can't wait!!!!!
#38
Cottage Industry Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Beth: Regarding the behavior of the blower motor - search for "magic blower syndrome" - I think that's what it was called before. Apparently it's quite common...
What a party that will be!!!
What a party that will be!!!
#41
Three Wheelin'
Yamabond is a fexible sealant. It seals the bolt so the oil stays in the tensioner. You can get it at a Yamaha dealer. Does anyone have a flywheel lock that we can borrow for the party? If not they can be had for less than $20 bucks at Devek.
Regards,
Regards,
#43
Three Wheelin'
Great thanks George. I let my uncle use mine. He is in Texas and I don't think i'd get it back in time as he is on vacation till around the 10th.
Regards,
Regards,
#44
Addict
Rennlist Member
Rennlist Member
Join Date: Apr 2004
Location: Puget Sound Area
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Beth... check with Jim Bailey; he knows right where
the blower resister pack goes. No surprise, eh?
He helped me with that very thing at Sharktoberfest.
(Our blower worked on only the 2 highest settings)
G'luck.
the blower resister pack goes. No surprise, eh?
He helped me with that very thing at Sharktoberfest.
(Our blower worked on only the 2 highest settings)
G'luck.
#45
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I have all the essentials for the TB/WP job (flywheel lock, gasket goop included). Might need a jug of coolant, rolls of paper towels, hand cleaner, baggies for parts, marking pens, 2-3 cans of brake cleaner aeresol.
Also, it would be real good if people interested in turning a wrench, and we need several to do so, please read John Pirtle's TB/WP guide, if you haven't already.
http://members.rennlist.com/pirtle/tbelt.html
Also, John has a section on the blower fan for Beth's other car.
http://members.rennlist.com/pirtle/svc_blo.html
Also, it would be real good if people interested in turning a wrench, and we need several to do so, please read John Pirtle's TB/WP guide, if you haven't already.
http://members.rennlist.com/pirtle/tbelt.html
Also, John has a section on the blower fan for Beth's other car.
http://members.rennlist.com/pirtle/svc_blo.html