944 OBD Project (On-Board Diagnostics)
#332
Rennlist Member
Hello Joe,
I just updated to the latest version, thanks. I received an optional upte for FTDI drivers from MS :
Could these impact the fonctionnality of OBD+ ?
Thanks,
Charles
I just updated to the latest version, thanks. I received an optional upte for FTDI drivers from MS :
Could these impact the fonctionnality of OBD+ ?
Thanks,
Charles
#333
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
#337
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Hi Everyone,
I just pushed FocusOBD v0.15.191 to the website, It fixes issues with automated flywheel sensor diagnostics.
Best Regards,
-Joe
I just pushed FocusOBD v0.15.191 to the website, It fixes issues with automated flywheel sensor diagnostics.
Best Regards,
-Joe
#338
Rennlist Member
#339
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Rogue Tuning and F9T DME OBD+ Upgrades
I now have an OBD+ Upgrade path for Rogue Tuning and F9T DMEs!
I have been thinking about how to offer an OBD upgrade for Rogue Tuning and F9T DMEs. To make good on this promise, I decided to offer a free upgrade to the latest SPORT DME with an OBD+ module order. Once you have placed an order for an OBD+ module, send in your RT or F9T DME as a core and I will send you back the latest DME and OBD+ installed.
Regards,
Joe Baumbach
I have been thinking about how to offer an OBD upgrade for Rogue Tuning and F9T DMEs. To make good on this promise, I decided to offer a free upgrade to the latest SPORT DME with an OBD+ module order. Once you have placed an order for an OBD+ module, send in your RT or F9T DME as a core and I will send you back the latest DME and OBD+ installed.
Regards,
Joe Baumbach
Last edited by Ftech9; 09-18-2021 at 09:47 PM.
The following users liked this post:
riouxc (09-18-2021)
#340
Rennlist Member
Rogue vs LR
I now have an OBD+ Upgrade path for Rogue Tuning and F9T DMEs!
I have been thinking out how to offer an OBD upgrade for Rogue Tuning and F9T DMEs. To make good on this promise, I decided to offer a free upgrade to the latest SPORT DME with an OBD+ module order. Just send in your RT or F9T DME as a core and I will send you back the latest OBD+ DME.
Regards,
Joe Baumbach
I have been thinking out how to offer an OBD upgrade for Rogue Tuning and F9T DMEs. To make good on this promise, I decided to offer a free upgrade to the latest SPORT DME with an OBD+ module order. Just send in your RT or F9T DME as a core and I will send you back the latest OBD+ DME.
Regards,
Joe Baumbach
I will send my ECU monday the fastest I can. My car will be in storage in November, hope to test this ASAP. My MAF kit is from Lindsey and I think that there are some small difference. Ex: FQS :
Looking at the values from Josh's data on TunerRT, there are not matching...
What is the difference from RT to F9T DME ?
Thanks!
Charles
#341
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Excellent news!
I will send my ECU monday the fastest I can. My car will be in storage in November, hope to test this ASAP. My MAF kit is from Lindsey and I think that there are some small difference. Ex: FQS :
Looking at the values from Josh's data on TunerRT, there are not matching...
What is the difference from RT to F9T DME ?
Thanks!
Charles
I will send my ECU monday the fastest I can. My car will be in storage in November, hope to test this ASAP. My MAF kit is from Lindsey and I think that there are some small difference. Ex: FQS :
Looking at the values from Josh's data on TunerRT, there are not matching...
What is the difference from RT to F9T DME ?
Thanks!
Charles
Regards,
Joe
Last edited by Ftech9; 09-18-2021 at 03:34 PM.
The following 2 users liked this post by Ftech9:
Dave Pierson (09-19-2021),
riouxc (09-18-2021)
#342
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Updated FocusOBD Software Available!
I just pushed FocusOBD v0.17.199 to the website. It has a patch to address the connection issue related to the new FTDI driver Windows is automatically installing. I am still working on a permanent fix, the issue is FTDI allows different versions of the same driver to be installed simultaneously. This is confusing the FocusOBD application as it try's to figure out which driver is being used.
I just pushed FocusOBD v0.17.199 to the website. It has a patch to address the connection issue related to the new FTDI driver Windows is automatically installing. I am still working on a permanent fix, the issue is FTDI allows different versions of the same driver to be installed simultaneously. This is confusing the FocusOBD application as it try's to figure out which driver is being used.
#343
Rennlist Member
Updated FocusOBD Software Available!
I just pushed FocusOBD v0.17.199 to the website. It has a patch to address the connection issue related to the new FTDI driver Windows is automatically installing. I am still working on a permanent fix, the issue is FTDI allows different versions of the same driver to be installed simultaneously. This is confusing the FocusOBD application as it try's to figure out which driver is being used.
I just pushed FocusOBD v0.17.199 to the website. It has a patch to address the connection issue related to the new FTDI driver Windows is automatically installing. I am still working on a permanent fix, the issue is FTDI allows different versions of the same driver to be installed simultaneously. This is confusing the FocusOBD application as it try's to figure out which driver is being used.
The software communicates with the ODB+ flawlesly but it doesn't show the version of USB port driver... Is this normal ?
#344
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Lets not get too excited, yes this FocusOBD software can read a specific MAF sensor via the auxiliary "AUX" input on the OBD+ module. However, it is not a part of engine management, it can only display its airflow in grams per second. The AUX connector was designed to be a universal generic input for various kinds analog sensors like fuel pressure and digital sensors such as Flex-Fuel. It could also output a 0 to 5V signal to drive devices like gauges or even simulate sensors. In this case, I need to read a MAF sensor in series with the AFM so I can verify if the OBD+ MAF controller can generate the same signal as the AFM. I completed the graphing feature so I could see both signals in real-time. Once the signals basically overlap on the graph, even as the ambient air pressure or temperature changes, we can then move to Beta testing. I will try to post later this week with a full update on the MAF Controller feature.
As for the USB Port Driver not displaying correctly, this will have no effect on functionality. It will take a day or two to rework the parser to handle this scenario, but it will need to wait because I am focused on MAF development at the moment.
- Joe
Last edited by Ftech9; 09-28-2021 at 10:31 AM.
The following users liked this post:
riouxc (09-28-2021)
#345
I'm trying to diagnose an intermittent stumbling at idle problem. At first it was with a cold engine but yesterday it occurred after driving a few miles. When it occurs the idle is rough/low rpm and applying the accelerator usually results in a stall. It restarts ok and usually clears up after a minute or two. I have the obd module. The DME temp equals the inlet air temp and water temp gauge when cold. The NBO2 reading is LEAN while running (I haven't driven it with the computer yet) and only momentarily goes to RICH when I rev it up to about 4K and release the pedal. So what should I be looking for in OBD to help diagnose the problem? Is there an OBD video of a good running 951 at idle I can compare my readings with? Thanks for any help you can provide.