Removing cam tower what tool?
#1
Burning Brakes
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok i'm about to remove my cam tower. However I can't get to the bolts under the cam cover top. My Allen head socket tool is too wide to fit in the hole, is there another tool or one I need to fabricate one? I have a standard Aallen head wrench that I can cut one leg off but I don't know if it will be strong enough or if it will damage the bolt below.
#3
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok i'm about to remove my cam tower. However I can't get to the bolts under the cam cover top. My Allen head socket tool is too wide to fit in the hole, is there another tool or one I need to fabricate one? I have a standard Aallen head wrench that I can cut one leg off but I don't know if it will be strong enough or if it will damage the bolt below.
#5
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You are going to need something else to put them back if you want to use a torque wrench though. I use long craftsman allen sockets for that. I wouldn't trust them for breaking the bolts loose because they have a ball on the end that doesn't grip all that well, but they're fine for reinstallation.
#7
Instructor
Join Date: Oct 2011
Location: Gales Ferry, CT
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you need to purchase the long allen socket make sure you buy a quality tool, you do not want to cheap out on this otherwise you will introduce other problems.
Trending Topics
#9
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My allen wrench socket broke inside cam tower. Pain.
#10
Burning Brakes
Thread Starter
#11
Instructor
Join Date: Oct 2011
Location: Gales Ferry, CT
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
#12
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've since purchased 6" long allen key sockets, but for a long time I used to use a homemade version of the same thing. Cut the L off a quality hardened allen key and then put the cut end in a standard 6mm hex socket. Use at least a 3/8" drive socket, or better a 1/2" drive for more control. Torque to 15 ft. lbs.
#13
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Great tip
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
#15
Burning Brakes
Thread Starter