Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

1980 924 Turbo Project

Thread Tools
 
Search this Thread
 
Old 06-11-2024, 11:06 AM
  #136  
BauerR
Pro
 
BauerR's Avatar
 
Join Date: Sep 2015
Location: Baltimore, MD
Posts: 651
Received 106 Likes on 54 Posts
Default

Originally Posted by Guy
They come on when the gauge touches the red.


Your fans should def come on before the gauge hits the red. You may have a switch problem

Last edited by BauerR; 06-11-2024 at 12:01 PM.
Old 06-12-2024, 08:58 AM
  #137  
924RACR
Addict
Rennlist Member

 
924RACR's Avatar
 
Join Date: Jun 2001
Location: Royal Oak, MI
Posts: 3,991
Received 83 Likes on 66 Posts
Default

Did you put on the low temp thermostat?
Old 06-21-2024, 01:54 PM
  #138  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Originally Posted by 924RACR
Did you put on the low temp thermostat?
Using a stock thermosswitch for the fans.

I did a second bleed and got a stubborn air pocket out. Seems to have done the trick. Fans come on right before third line now and cools the car right down. Hopefully charging the AC next week.
The following users liked this post:
924RACR (06-26-2024)
Old 06-26-2024, 10:49 AM
  #139  
924RACR
Addict
Rennlist Member

 
924RACR's Avatar
 
Join Date: Jun 2001
Location: Royal Oak, MI
Posts: 3,991
Received 83 Likes on 66 Posts
Default

...but there's a few different temperature thermostats, I prefer the lowest one for the Turbo...
The following users liked this post:
BauerR (06-26-2024)
Old 06-28-2024, 02:38 AM
  #140  
Not_Sure
Rennlist Member
 
Not_Sure's Avatar
 
Join Date: Aug 2017
Location: Rocky mtn High
Posts: 691
Received 54 Likes on 38 Posts
Default

I drilled a 3/16 hole in the thermostat, just to make sure there is always coolant circulating, since they run hot
Old 07-09-2024, 09:16 AM
  #141  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Originally Posted by 924RACR
...but there's a few different temperature thermostats, I prefer the lowest one for the Turbo...
yep, I thought they were marked but this one was on the shelf in my stash and has no markings. I may just order a lower switch and thermostat just to be sure.

It's been hotter than hell here and it stays below the red even in spirited driving. Did a local car show on Sunday and it was flawless to drive.


The following 2 users liked this post by Guy:
924RACR (07-09-2024), mazdaverx7 (08-11-2024)
Old 07-23-2024, 12:57 PM
  #142  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Happy to report another milestone. I now have working air conditioning. Enjoyed a 30 mile ride the other day in cool comfort!!

Looks like it's time to move on to my 79 928 project.


The following 3 users liked this post by Guy:
924RACR (07-24-2024), mazdaverx7 (08-11-2024), tannat (08-30-2024)
Old 07-23-2024, 02:10 PM
  #143  
BauerR
Pro
 
BauerR's Avatar
 
Join Date: Sep 2015
Location: Baltimore, MD
Posts: 651
Received 106 Likes on 54 Posts
Default

Originally Posted by Guy
Happy to report another milestone. I now have working air conditioning. Enjoyed a 30 mile ride the other day in cool comfort!!

Looks like it's time to move on to my 79 928 project.
Nicely done! How effective is the A/C?
Other than the condenser, were there any other aftermarket components used?
Old 07-23-2024, 02:29 PM
  #144  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Originally Posted by BauerR
Nicely done! How effective is the A/C?
Other than the condenser, were there any other aftermarket components used?
I replaced the condenser, receiver/dryer and all the o rings. Compressor is original. Used 26 oz of R134a. I haven't measured the temp output yet but it seems very comparable to my modern R134a cars. It was mid 90s and high humidity outside on my 30 mile ride. I will get my IR thermometer on it soon.

On my 928s, I typically can get around 35 degrees out the vents on an average 85 degree day. I would guess this is going to be more around 40 degrees.

The following users liked this post:
BauerR (07-23-2024)
Old 07-23-2024, 02:39 PM
  #145  
BauerR
Pro
 
BauerR's Avatar
 
Join Date: Sep 2015
Location: Baltimore, MD
Posts: 651
Received 106 Likes on 54 Posts
Default

Originally Posted by Guy
I replaced the condenser, receiver/dryer and all the o rings. Compressor is original. Used 26 oz of R134a. I haven't measured the temp output yet but it seems very comparable to my modern R134a cars. It was mid 90s and high humidity outside on my 30 mile ride. I will get my IR thermometer on it soon.

On my 928s, I typically can get around 35 degrees out the vents on an average 85 degree day. I would guess this is going to be more around 40 degrees.
Did you vacuum the system or just buy an "off the shelf" pressurized can product from an auto parts store?
Old 07-23-2024, 02:43 PM
  #146  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Originally Posted by BauerR
Did you vacuum the system or just buy an "off the shelf" pressurized can product from an auto parts store?
Vac'd down for well over an hour multiple times. I am fortunate in that I have access to shop equipment to add the refrigerant.
The following users liked this post:
BauerR (07-23-2024)
Old 08-11-2024, 05:54 PM
  #147  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Originally Posted by 924RACR
Did you put on the low temp thermostat?
I replaced the fan thermostat switch over the weekend, Car now runs perfectly centered on the dash gauge. The one removed was 95 degrees, the new one is 75 degrees.

I keep saying I am done........I swear I am done this time
The following 2 users liked this post by Guy:
924RACR (08-12-2024), BauerR (08-13-2024)
Old 08-11-2024, 08:09 PM
  #148  
mazdaverx7
Rennlist Member
 
mazdaverx7's Avatar
 
Join Date: Nov 2010
Location: Vermilion Ohio
Posts: 2,572
Received 69 Likes on 58 Posts
Default

The car is looking as incredible as ever! Glad to hear that you were able to get your air conditioner working! That's a huge step. Mine has never worked in my 944 and I've had the car for more than 10 years. Just never dove into it. Well done sir!
Old 08-13-2024, 01:00 PM
  #149  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

Originally Posted by mazdaverx7
The car is looking as incredible as ever! Glad to hear that you were able to get your air conditioner working! That's a huge step. Mine has never worked in my 944 and I've had the car for more than 10 years. Just never dove into it. Well done sir!
Thank you so much!! Its funny, I have a 1979 Trans Am that was restored years ago, just never charged the A/C. Now 21 years later, I am thinking of diving back into it. A/C was never important to me, now I kinda like having the option available to use!
Old 08-18-2024, 07:17 PM
  #150  
Guy
Addict
Rennlist Member

Thread Starter
 
Guy's Avatar
 
Join Date: Aug 2002
Location: Bucks County, PA
Posts: 2,275
Received 345 Likes on 195 Posts
Default

The fun for me has always been the hunt, the acquisition and the rehab. This was my SIXTH project Porsche since 2018, its time to do my 79 928 and get my 997 back into the garage.
1980 Porsche 924 Turbo FOR SALE
\
The following users liked this post:
tannat (08-30-2024)


Quick Reply: 1980 924 Turbo Project



All times are GMT -3. The time now is 10:39 PM.