After a 25 Year Break, 914 Ownership Again
10-23-2019, 11:41 AM
Burning Brakes
Join Date: Jun 2014
Posts: 912
Likes: 0
the worst I can see is all of the black crap someone sprayed all over the car!
10-31-2019, 11:55 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
Surgery begins, with a rough cut of the rear trunk floor. Hoping to save the original cross member and splice in along its rear edge.
11-04-2019, 10:18 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
Cleaner cut, trying to save the flange where the floor and transaxle brace are seamed. Also working on straightening the inner fender (right) and the rear panel.
11-04-2019, 10:20 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
And working on the front, but not likely to save the front right panel and inner fender. I need to find a used replacement.
11-05-2019, 01:11 AM
Official Wednesday AM Red Bull F1 test driverRennlist Member
Join Date: Apr 2003
Location: North Scottsdale
Posts: 10,002
Boy, you're doing some major surgery there... I see Restoration Design in your future! Glad you're saving another 914!!
The following users liked this post:
11-05-2019, 03:26 PM
Burning Brakes
Join Date: Jun 2014
Posts: 912
Likes: 0
luckily we made all of the rust repair parts years before restoration design bought lansing steel who had all of our tooling that we proceeded to lose because we had nothing in writing. Kills me every time it is mentioned.
11-05-2019, 10:29 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
11-07-2019, 03:54 PM
Burning Brakes
Join Date: Jun 2014
Posts: 912
Likes: 0
Quote:
Originally Posted by
bkrantz
Surgery begins, with a rough cut of the rear trunk floor. Hoping to save the original cross member and splice in along its rear edge.
we have a perfect replacement rear trunk floor with all of the original stampings in it
11-11-2019, 09:53 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
Decided to see what's under the black paint on the bumpers. Chrome, yes, but sanded before painted.
11-15-2019, 10:47 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
Donor front end for replacing the right front corner (front panel, inner fender, and headlight box).
The following users liked this post:
11-16-2019, 03:41 PM
Official Wednesday AM Red Bull F1 test driverRennlist Member
Join Date: Apr 2003
Location: North Scottsdale
Posts: 10,002
Maybe you want to keep it all original, but if I were you I'd fill in the side holes and get rid of those ugly warts!
11-16-2019, 10:24 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
Quote:
Maybe you want to keep it all original, but if I were you I'd fill in the side holes and get rid of those ugly warts!
I am thinking about that. I will see how things go, and how many mods I embrace.
11-16-2019, 10:26 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
Starting surgery on the donor nose section.
11-17-2019, 11:34 PM
Rennlist Member
Thread Starter
Join Date: Oct 2012
Location: SW Colorado
Posts: 6,012
Likes: 0
More surgery on the donor clip. This is close to the largest section I might splice in.
11-18-2019, 01:38 PM
Burning Brakes
Join Date: Jun 2014
Posts: 912
Likes: 0
we have an opening for a good welder like you are!
The following users liked this post: