Official Waiting Room for 718 Spyder / GT4 / GTS Delivery...
#586
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Got word my car went V810 today, its in Baltimore… hopefully it hits the dealer by next weekend!
The following 2 users liked this post by daaa nope:
cnw126 (07-03-2021),
P-car-Vancouver (07-03-2021)
#587
Racer
#588
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just finalized my build today with one last tweak. It didn’t affect the dates, so happy for that. The build date had already slipped from July 27 to August 30. I am still hoping to pick up a week and have it built before the holiday. I am a bit worried that the builders will have forgotten what they should be doing and it will be delivered with a bag of bolts that were left over after they finished. I guess on the flip side they could be distracted by dreaming about their upcoming vacation and not be focused on what they are doing. I had mentioned before that my 992 was delivered with a bad install of the windshield (very visible - one look and it could be seen). A guy in the 992 forum just received a 992 with the wrong color sunroof. I really would like to have a car roll off that was built correctly.
The following users liked this post:
P-car-Vancouver (07-03-2021)
#589
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just finalized my build today with one last tweak. It didn’t affect the dates, so happy for that. The build date had already slipped from July 27 to August 30. I am still hoping to pick up a week and have it built before the holiday. I am a bit worried that the builders will have forgotten what they should be doing and it will be delivered with a bag of bolts that were left over after they finished. I guess on the flip side they could be distracted by dreaming about their upcoming vacation and not be focused on what they are doing. I had mentioned before that my 992 was delivered with a bad install of the windshield (very visible - one look and it could be seen). A guy in the 992 forum just received a 992 with the wrong color sunroof. I really would like to have a car roll off that was built correctly.
It can always be worse, they can deliver a car with a defective internal engine part such as connecting rods.
Can you imagine the tear down that is required to replace that?
![ooops](https://rennlist.com/forums/graemlins/icon501.gif)
![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
The following users liked this post:
Dan Nagy (07-04-2021)
#590
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Oh I realize it will not be a real world test drive. But I am selling a super fun M2 for this car. They are very different machines with very different motors. For twice the price I want to be sure I know what I am getting. It’s hard to commit to a car based on listening to YouTube reviews. I am sure a little seat time will be very helpful.
It all depends on what you want. I can tell you 2-3X the price does not equate 2-3X ‘better’.
Drive wheels, weight, engine placement, manual vs auto, NA vs turbo….They are all different in their own special way.
Worse case scenario, you can always sell your GT4 and get a M2CS. But I am guessing you will not be disappointed. Lots of BMW guys move over to Porsche and stay here.
The following 3 users liked this post by Dyim:
#591
Intermediate
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Stopped by my dealer this weekend to check my status and change a couple of options (after much research here).
I'm V200 now with a lock on June 11. Build in July. Delivery late August. I was advised that delivery may be delayed slightly since I've opted for a PEC Atlanta delivery (I live in Atlanta).
I just added LWBS to my build. I would appreciate any suggestions on the build before it locks.
http://www.porsche-code.com/PN2CWGN9
I'm V200 now with a lock on June 11. Build in July. Delivery late August. I was advised that delivery may be delayed slightly since I've opted for a PEC Atlanta delivery (I live in Atlanta).
I just added LWBS to my build. I would appreciate any suggestions on the build before it locks.
http://www.porsche-code.com/PN2CWGN9
#592
#593
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
New guys in the waiting room. You might consider visiting the great thread halfmonkey started to track everybody’s builds and progress
https://rennlist.com/forums/718-gts-...-database.html
https://rennlist.com/forums/718-gts-...-database.html
The following 3 users liked this post by P-car-Vancouver:
#594
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It is with joy that I report my departure from the waiting room. I took delivery of a GT Silver Spyder yesterday and spent the whole day driving while the sun burnt my skin. All I can say is that I already know it was worth the wait and the money, and I haven't crossed 4 krpm yet. That's exactly where you start to hear a resonance in the intake/exhaust, begging you to break the run-in rules specified in the manual. Getting to 3000 km without going over in revs is going to be tough. Wish me luck.
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
The following 10 users liked this post by Hematose:
Dan Nagy (07-04-2021),
GarrettGTS (07-06-2021),
halfmonkey (07-05-2021),
jimdillard (02-07-2022),
LnC993 (07-04-2021),
and 5 others liked this post.
#595
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It is with joy that I report my departure from the waiting room. I took delivery of a GT Silver Spyder yesterday and spent the whole day driving while the sun burnt my skin. All I can say is that I already know it was worth the wait and the money, and I haven't crossed 4 krpm yet. That's exactly where you start to hear a resonance in the intake/exhaust, begging you to break the run-in rules specified in the manual. Getting to 3000 km without going over in revs is going to be tough. Wish me luck.
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
P.s. I'm not far behind you - fingers crossed for next Thursday!
The following 4 users liked this post by Zeus993:
Dan Nagy (07-04-2021),
halfmonkey (07-05-2021),
P-car-Vancouver (07-04-2021),
UncleDude (07-04-2021)
#596
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It is with joy that I report my departure from the waiting room. I took delivery of a GT Silver Spyder yesterday and spent the whole day driving while the sun burnt my skin. All I can say is that I already know it was worth the wait and the money, and I haven't crossed 4 krpm yet. That's exactly where you start to hear a resonance in the intake/exhaust, begging you to break the run-in rules specified in the manual. Getting to 3000 km without going over in revs is going to be tough. Wish me luck.
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
The following 3 users liked this post by P-car-Vancouver:
#597
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It is with joy that I report my departure from the waiting room. I took delivery of a GT Silver Spyder yesterday and spent the whole day driving while the sun burnt my skin. All I can say is that I already know it was worth the wait and the money, and I haven't crossed 4 krpm yet. That's exactly where you start to hear a resonance in the intake/exhaust, begging you to break the run-in rules specified in the manual. Getting to 3000 km without going over in revs is going to be tough. Wish me luck.
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
To all of you, I hope that Porsche gets all of their chips and con-rods sorted out, and that you are sitting where I am in no time!
https://rennlist.com/forums/718-gts-...s-for-gt4.html
The following 3 users liked this post by P-car-Vancouver:
The following 7 users liked this post by Chris3963:
AdamIsAdam (07-05-2021),
halfmonkey (07-05-2021),
LnC993 (07-05-2021),
P-car-Vancouver (07-06-2021),
Porsche2014 (07-06-2021),
and 2 others liked this post.
The following users liked this post:
Porsche2014 (07-07-2021)