When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is it only me or are the lights in the trunk area completely useless? Even in my parents Kia Forte you have great lighting in the trunk area. In my Macan you can't see anything in the trunk at night. Just curious if there is any adjustment I can make those lights brighter.
Is it only me or are the lights in the trunk area completely useless? Even in my parents Kia Forte you have great lighting in the trunk area. In my Macan you can't see anything in the trunk at night. Just curious if there is any adjustment I can make those lights brighter.
On the other hand, WTF Porsche!! You buy a Luxury car and now you have to fiddle in some cheap LED bulbs risking messing with the electronics and loosing warranty. Why can't they put something appropriate in there? Don't they test the cars?
I removed the whole rear light but can't figure out how to remove the bulb itself. Can you help me with that?
Here is the instruction sheet from the eBay product listing. It is not in English, but the pictures are pretty clear. You are essentially snapping apart the light enclosure, removing the circuit board and replacing it with the new circuit board, and then snapping it all back together. No glue or screws involved...it is all a snap fit. Then of course just plug it back into the wiring harness. Hope this helps!
I was just feeling that how useless trunk lights were last night. Thanks for sharing the link. Just purchased and hope these LED helps to see better in trunk area at night.
Originally Posted by schnell
Here is the instruction sheet from the eBay product listing. It is not in English, but the pictures are pretty clear. You are essentially snapping apart the light enclosure, removing the circuit board and replacing it with the new circuit board, and then snapping it all back together. No glue or screws involved...it is all a snap fit. Then of course just plug it back into the wiring harness. Hope this helps!
just installed these lights. What an improvement!
only needed a trim tool to remove the light assembly from the trunk. Unplug harness, take off plastic cover. Replace the light and install. It was very smooth 5 mins job. Thanks for sharing. Orignial New LED