When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you run the wires through the roof or the floor? I assume you go through the passenger side since the camera is on that side. Can you provide more details on how you did yours?
Many thanks!!!!
I ran them on the right side above the A pillar, above the 2 side windows and then I put the battery backup in the spare tire area and plugged the power plug into the cigarette outlet on the left side of the trunk.
I'd like to see a factory rear view mirror with a Porsche dash cam incorporated directly into the rear view mirror mounting bracket. I'd pay additional for that.
I ran them on the right side above the A pillar, above the 2 side windows and then I put the battery backup in the spare tire area and plugged the power plug into the cigarette outlet on the left side of the trunk.
Did you run the wires for the rear camera through factory wiring grommets? If so did you have to remove the rear hatch weather strips?
How did you remove the rear boot wiring grommet? Are there any clips?
Did you run the wires for the rear camera through factory wiring grommets? If so did you have to remove the rear hatch weather strips?
How did you remove the rear boot wiring grommet? Are there any clips?
No the wires are pushed into the pillar cover trim and you can get all the way to the back, you need those orange tools, Some people take the trim off but is not necessary
No the wires are pushed into the pillar cover trim and you can get all the way to the back, you need those orange tools, Some people take the trim off but is not necessary
thanks, any chance you could take a closeup photo of the rear camera ?
I mounted my Blackview the same way but went through grommet to eliminate any hanging wires. No clips or anything else strange, just removed from both ends and used a long, thin screwdriver to push the dash cam wiring through.
@toma nova
Could you please confirm, inorder to remove this rubber grommets, is it just a matter of pulling them out ? Are they not secured by plastics ?
Did you also pull the weather strip out in the boot liner close to the wiring grommet ?
did you also remove the plastic panel on the rear door close to the grommet or did you manage to fish the wires without taking these trims ?
Last edited by Greyphantom; 01-20-2023 at 05:41 PM.
Hi all, does anyone know/ have any instructions on how to remove the A-pillar ? I’d like to run the dashcam wires under the airbags hence the question
do you have to remove any screws or is it just a matter of pulling the a-pillar trim out hoping no clips might break?
@toma nova
Could you please confirm, inorder to remove this rubber grommets, is it just a matter of pulling them out ? Are they not secured by plastics ?
Did you also pull the weather strip out in the boot liner close to the wiring grommet ?
did you also remove the plastic panel on the rear door close to the grommet or did you manage to fish the wires without taking these trims ?
That grommet just pulls out from both the hatch and the frame. It won’t move very far since it is full of wires, I used a small thin screwdriver to push the cam wire through.
I did not remove any plastic panels or the A pillar trim, simply used the included trim tool to push the wire under the trim or rubber molding.
Sorry, may I please ask if you removed this panel to run the wires ?
also, did you had to remove the weather strip in the rear trunk to route wires through the grommet ?
Sorry, may I please ask if you removed this panel to run the wires ?
also, did you had to remove the weather strip in the rear trunk to route wires through the grommet ?
I just tucked the wire in, I didn’t have to remove it
08-13-2021, 10:24 AM
