When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The bar is setup properly. Everything is where it should be.
Camber is 3.5/2.5 respectively on hoosiers. Moving to NT01 as soon as last set of hoosiers is done. Will realign at that time.
The car is very snappy.
i drove at last event with .25 deg toe out in front and adjusted rake as well - that was snappy. reduced it to .10 deg toe out now.
you may not need to drop rear camber at all, just get front to -3.0 with NT01 and watch uniformity of tires temperature and wear signs on fresh tires after first sessions, you will see on new tires right away where you hit them most.
Ok what am I missing here. When I bought my GT3 came with GT2 rear sway bar in a box. Just pulled it out to install and there are only 2 holes/settings. Have read where some people put in the middle setting. What is the middle setting if there are only 2 holes? Part number is 99733370196. Checked and believe it is the correct bar. Help?!
Dingbat alert. Went and checked my bar more closely. There is some black tape covering the middle hole. Live and learn.
Ok what am I missing here. When I bought my GT3 came with GT2 rear sway bar in a box. Just pulled it out to install and there are only 2 holes/settings. Have read where some people put in the middle setting. What is the middle setting if there are only 2 holes? Part number is 99733370196. Checked and believe it is the correct bar. Help?!
I am afraid something will leak out if I do that! Also may affect the handling adversely. You probably took yours off and that's why you don't like it!
that tape is like the little plastic cover they put over the "red button" that launches a missle, or the pin in a grenade, remove it only if you are ready!
that tape is like the little plastic cover they put over the "red button" that launches a missle, or the pin in a grenade, remove it only if you are ready!
LOL...that must have been some super stealthy tape!
I only make fun of him because I did the same thing. I don't know how they do it, but the damn tape is almost imperceptible. I thought they sent me the wrong bar too
I only make fun of him because I did the same thing. I don't know how they do it, but the damn tape is almost imperceptible. I thought they sent me the wrong bar too
Funny stuff...I'm laughing with you guys not at ya. Lucky for me Orbit made my bars and set them.....full soft front and full stuff rear....I haven't changed them. Since I don't know if they are stiffer than GT3 bars I just left them alone.
I only make fun of him because I did the same thing. I don't know how they do it, but the damn tape is almost imperceptible. I thought they sent me the wrong bar too
I swear somebody snuck in drilled new holes and then put tape over them. Hope they did not let the unobtanium leak out.
Went by Suncoast today to get my alternator squared away. While I was there, I checked on the rear GT2 sway bar.
For those that want it, I negotiated a Rennlist price of $310 including the bushings. Pretty sweet deal. Make sure you ask for Ric or Phil. That's a pretty good deal.