Bucket seats and airbag coding
#61
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
On Foxwell NT530, AWS will need to be set to “not installed” under Gateway coding.
Menu Sequence on NT530:
IIRC, AWS is the only coding change that’s needed for the US buckets with airbags. For ROW buckets without airbags, seat airbags settings might also need to be turned off or set to not installed, in addition to AWS being off.
With AWS(weight sensors) coded out, some say the seat airbags will always deploy regardless of occupancy. So take this into consideration for small human or pets on the passenger seat. Of course no one wants to test this out in real life.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Hope this helps, stay safe.
Menu Sequence on NT530:
Programming
Gateway Control System
Codings adaptations
Required control unit lists
AWS -> “not installed”
https://youtube.com/shorts/yNMfHGezLEs?feature=shareGateway Control System
Codings adaptations
Required control unit lists
AWS -> “not installed”
IIRC, AWS is the only coding change that’s needed for the US buckets with airbags. For ROW buckets without airbags, seat airbags settings might also need to be turned off or set to not installed, in addition to AWS being off.
With AWS(weight sensors) coded out, some say the seat airbags will always deploy regardless of occupancy. So take this into consideration for small human or pets on the passenger seat. Of course no one wants to test this out in real life.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Hope this helps, stay safe.
Last edited by turbospeeder; 07-08-2023 at 04:47 PM.
The following 5 users liked this post by turbospeeder:
Clifton (07-09-2023),
f50nut (01-25-2024),
gt3ftw (07-10-2023),
Jeroen//997 (06-18-2024),
Seedster (05-28-2024)
#62
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hello,
I tried to code via Piwis 3 airbag ECU to change from Driving Right to Driving Left, because I bought the ECU from UK.
When I try to save, I got error : wrong value of SETTING-ID ?
This field was empty, I tried to put numbers...like 1 800 ...anything, no way
Have you an idea please ?
I tried to code via Piwis 3 airbag ECU to change from Driving Right to Driving Left, because I bought the ECU from UK.
When I try to save, I got error : wrong value of SETTING-ID ?
This field was empty, I tried to put numbers...like 1 800 ...anything, no way
Have you an idea please ?
#63
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hello,
I tried to code via Piwis 3 airbag ECU to change from Driving Right to Driving Left, because I bought the ECU from UK.
When I try to save, I got error : wrong value of SETTING-ID ?
This field was empty, I tried to put numbers...like 1 800 ...anything, no way
Have you an idea please ?
I tried to code via Piwis 3 airbag ECU to change from Driving Right to Driving Left, because I bought the ECU from UK.
When I try to save, I got error : wrong value of SETTING-ID ?
This field was empty, I tried to put numbers...like 1 800 ...anything, no way
Have you an idea please ?
Last edited by Wonderdan; 01-24-2024 at 09:52 AM.
#65
Rennlist Member