I Bought the White Flood 997 GT3RS at Copart
#61
Rennlist Member
That’s awesome. Everything is coming along. I’m really enjoying the videos!!!!Let me know if you ever need an extra hand. I have met you before at the local Porsche events.
#62
Rennlist Member
have you tried driving car a few 100 ft to see if the TC / PASM clears?
Did you check your gateway coding or any errors in the gateway module (its the router to all the other modules on the CAN bus)
A while back I had a PASM shock fail, and it behaved in a similar way Might check the shock connections.
Did you check your gateway coding or any errors in the gateway module (its the router to all the other modules on the CAN bus)
A while back I had a PASM shock fail, and it behaved in a similar way Might check the shock connections.
#63
Rennlist Member
have you tried driving car a few 100 ft to see if the TC / PASM clears?
Did you check your gateway coding or any errors in the gateway module (its the router to all the other modules on the CAN bus)
A while back I had a PASM shock fail, and it behaved in a similar way Might check the shock connections.
Did you check your gateway coding or any errors in the gateway module (its the router to all the other modules on the CAN bus)
A while back I had a PASM shock fail, and it behaved in a similar way Might check the shock connections.
#64
Rennlist Member
Thread Starter
have you tried driving car a few 100 ft to see if the TC / PASM clears?
Did you check your gateway coding or any errors in the gateway module (its the router to all the other modules on the CAN bus)
A while back I had a PASM shock fail, and it behaved in a similar way Might check the shock connections.
Did you check your gateway coding or any errors in the gateway module (its the router to all the other modules on the CAN bus)
A while back I had a PASM shock fail, and it behaved in a similar way Might check the shock connections.
#65
Rennlist Member
Thread Starter
Thanks I appreciate the offer. Yes, I know who you are. You have the 997.1 in white. I always thought if only my red car was as clean as yours lol
The following users liked this post:
Robocop305 (11-30-2021)
#66
Rennlist Member
Good show Pedro
Let's see what happens when we do a VAL and Vehicle Handover. Also, if your car had a front lift the water most likely would have damaged it. They fail without water/flooding anyway
And it looks like your tpms is working fine.
I'll bring my 55amp power source, the service manual says to have one connected when using Piwis
Seems like there was less water damage than imagined-the damp rid is a good idea, and since the AC works, a good drive with it on then parking in the sun with everything open is a good idea to prevent mold
Let's see what happens when we do a VAL and Vehicle Handover. Also, if your car had a front lift the water most likely would have damaged it. They fail without water/flooding anyway
And it looks like your tpms is working fine.
I'll bring my 55amp power source, the service manual says to have one connected when using Piwis
Seems like there was less water damage than imagined-the damp rid is a good idea, and since the AC works, a good drive with it on then parking in the sun with everything open is a good idea to prevent mold
The following users liked this post:
Robocop305 (12-01-2021)
#67
Rennlist Member
Good show Pedro
Let's see what happens when we do a VAL and Vehicle Handover. Also, if your car had a front lift the water most likely would have damaged it. They fail without water/flooding anyway
And it looks like your tpms is working fine.
I'll bring my 55amp power source, the service manual says to have one connected when using Piwis
Seems like there was less water damage than imagined-the damp rid is a good idea, and since the AC works, a good drive with it on then parking in the sun with everything open is a good idea to prevent mold
Let's see what happens when we do a VAL and Vehicle Handover. Also, if your car had a front lift the water most likely would have damaged it. They fail without water/flooding anyway
And it looks like your tpms is working fine.
I'll bring my 55amp power source, the service manual says to have one connected when using Piwis
Seems like there was less water damage than imagined-the damp rid is a good idea, and since the AC works, a good drive with it on then parking in the sun with everything open is a good idea to prevent mold
The following users liked this post:
f50nut (12-01-2021)
#68
Rennlist Member
Enjoying the videos, can't wait to see the RS ripping around flawlessly!
It sure seems like having a full PIWIS (clone) instead of just the Durametric would make your life much easier...
Might check out this thread on how to set one up at a very modest cost. It's definitely a bit clunky to use, not very intuitive, and particular about the order in which you do things like attach the cables, start the app, etc., but it definitely has a level of functionality and fault finding beyond what I've been able to do with the Durametric.
-----
Edit: Never mind! I watched ahead and saw the simple resolution to your PASM issue...
Congrats! What a score!
It sure seems like having a full PIWIS (clone) instead of just the Durametric would make your life much easier...
Might check out this thread on how to set one up at a very modest cost. It's definitely a bit clunky to use, not very intuitive, and particular about the order in which you do things like attach the cables, start the app, etc., but it definitely has a level of functionality and fault finding beyond what I've been able to do with the Durametric.
-----
Edit: Never mind! I watched ahead and saw the simple resolution to your PASM issue...
Congrats! What a score!
Last edited by pfbz; 12-01-2021 at 02:20 AM.
#69
Rennlist Member
Thread Starter
See, this is why i asked for suggestions. Thanks !!
The following 10 users liked this post by drola:
311RS (12-01-2021),
brake dust (12-02-2021),
cakM3 (03-30-2022),
DocR (12-01-2021),
PK911 (12-01-2021),
and 5 others liked this post.
#72
Rennlist Member
Thread Starter
I have some more I can do. Like the oil change, which i already have done and just needs editing. The carpet coming out is another one. Anything else anyone wants to see?
The following 2 users liked this post by drola:
brake dust (12-02-2021),
VPD255M (12-24-2021)
#73
Rennlist Member
Amazing work with the project, Pedro. So nice to see the car saved and come to life with some TLC. The car couldn't have gone to a better home!
Looking forward to seeing you soon and meeting the car. I have been craving some of your coffee since AA, and CooRS of course.
Looking forward to seeing you soon and meeting the car. I have been craving some of your coffee since AA, and CooRS of course.
#74
Rennlist Member
Outstanding work! I feel the exact same way about the 997RS, dream cars!
#75
Rennlist Member
Congrats! The car came together beautifully, your videos are entertaining to watch and you're throwing up content that benefits this community. This thread is full of Winning!
Get to know your car members, not just their value!
Get to know your car members, not just their value!
The following users liked this post:
Robocop305 (12-01-2021)