DIY Custom Ducktail
#106
Rennlist Member
Thread Starter
I like reiterations of process. Take what I did and make it cheaper, better, faster.
You need to do this for under 150 and less than 40hrs effort....
You need to do this for under 150 and less than 40hrs effort....
#107
That would be the goal... Hope it comes out looking as good as yours!
I'm just doing this for fun/to experiment making something like this so I don't think I'll be actively trying to sell anything. But, there will be a mold now to make more if people are interested I guess.
Cheers!
I'm just doing this for fun/to experiment making something like this so I don't think I'll be actively trying to sell anything. But, there will be a mold now to make more if people are interested I guess.
Cheers!
#111
Flying ducktail
I chose this Ducktail because it is smaller and more subtle than most. The taiwanese supplier no longer sells them but I note that there is a proposed group buy on Rennlist with the designer. If of interest do a search here
#112
#113
Rennlist Member
#115
But.... Better Bodies just came out with a super inexpensive one that is applied to the spoiler which, miiiighhtttt just look ok if it's installed properly. Their pictures look like they just test fit it with clear tape:
#116
Rennlist Member
Hopefully this week. We agreed end of month. I called today but didn't want the update from the receptionist so waiting for a call back. It sucks driving around with no decklid...
I have been playing around with the lettering on the back. Not sure if I am going to leave it naked or try one of these configs. I think I like the last 2 the best.
I have been playing around with the lettering on the back. Not sure if I am going to leave it naked or try one of these configs. I think I like the last 2 the best.
#117
Rennlist Member
@Bomba Yes I’ve actually been looking at better bodies (aka the infamous gt3tek?) rear “wing” options for months now. I like the mini duck lip on the cola de pato which you posted, however I’m not a fan of how it doesn’t extend up the side like the gt3tek rear wing option. This looks like they designed it half way and called it a day. It would of been nice if they combined the gt3tek rear wing which goes up the sides with the pato de cola which has a larger duck lip. I’m leaning towards the smaller one since it flows better and doesn’t look cut off.
Last edited by GT2RSobsessed; 03-15-2023 at 10:12 PM.
The following users liked this post:
Bomba (03-16-2023)
#118
@Bomba Yes I’ve actually been looking at better bodies (aka the infamous gt3tek?) rear “wing” options for months now. I like the mini duck lip on the cola de pato which you posted, however I’m not a fan of how it doesn’t extend up the side like the gt3tek rear wing option. This looks like they designed it half way and called it a day. It would of been nice if they combined the gt3tek rear wing which goes up the sides with the pato de cola which has a larger duck lip. I’m leaning towards the smaller one since it flows better and doesn’t look cut off.
#119
Rennlist Member
That is true. I requested for more pictures from the company. As far as Moshammer, the fit and finish looks pretty good. I’ve seen it in person at a 911 event last summer. I just hated the moshammer logo on it.