What did you do to your 997 today?
#1171
#1174
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
damn I love that orange TT!!!
I'm getting my car ready for transport to TX. I will miss her badly!
I'm getting my car ready for transport to TX. I will miss her badly!
#1176
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Changed the oil, Performance Friction 08 pads and installed a pair of Sparco Evo II seats and 6 point belts with a Brey Krause harness bar for the DE season.
Last edited by Canyonrs4; 05-21-2014 at 10:51 PM. Reason: photo
#1177
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Changed my transmission fluid today. Don't think i want to do this again without a lift. JP gave me just enough clearance to do what I had to do to get the job done. If you have never changed the transmission fluid, you will need to have the engine running while you crawl under it to pump new fluids into the tranny....needless to say this was a little frightening. To help pump the new fluids back into the tranny, I rigged up this contraption. Here is a parts list ... all of which I picked up from Home Depot:
1 gallon capacity pump Flo Master Heavy Duty
1/4" dia copper tubing (8" long)
1/4" dia copper tubing (4" long)
3/8" outer dia vinyl tubing 10' long (1/4" inner dia)
The 4" long copper tube inserted into both vinyl tubing and the hose that comes with the pump. The inner dia of both clear vinyl and pump tube are 1/4". See pix #1.
The 8" long copper tube connected to vinyl tube. See pix #2.
A close-up pix of 8" copper tube with hook. Finger gives scale of hook. See pix #3.
Copper tube hook hangs from tranny pan. See pix #4.
Here are the DIYs for the job:
Tiptronic:
http://www.pelicanparts.com/techarti...sion_Fluid.htm
Manual:
http://www.pelicanparts.com/techarti...sion_Fluid.htm
Hope this helps others who may want to do this job.
1 gallon capacity pump Flo Master Heavy Duty
1/4" dia copper tubing (8" long)
1/4" dia copper tubing (4" long)
3/8" outer dia vinyl tubing 10' long (1/4" inner dia)
The 4" long copper tube inserted into both vinyl tubing and the hose that comes with the pump. The inner dia of both clear vinyl and pump tube are 1/4". See pix #1.
The 8" long copper tube connected to vinyl tube. See pix #2.
A close-up pix of 8" copper tube with hook. Finger gives scale of hook. See pix #3.
Copper tube hook hangs from tranny pan. See pix #4.
Here are the DIYs for the job:
Tiptronic:
http://www.pelicanparts.com/techarti...sion_Fluid.htm
Manual:
http://www.pelicanparts.com/techarti...sion_Fluid.htm
Hope this helps others who may want to do this job.
Last edited by mlv_250; 05-25-2014 at 12:26 PM. Reason: Adding Pix
#1178
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
had the stock wheels powder coated, installed yesterday...
![](https://rennlist.com/forums/members/domer911-albums-turbo-s-cabriolet-picture25963-z2014-05-25-08-22-32.jpg)
![](https://rennlist.com/forums/members/domer911-albums-turbo-s-cabriolet-picture25958-z2014-05-25-08-15-19.jpg)
![](https://rennlist.com/forums/members/domer911-albums-turbo-s-cabriolet-picture25963-z2014-05-25-08-22-32.jpg)
![](https://rennlist.com/forums/members/domer911-albums-turbo-s-cabriolet-picture25958-z2014-05-25-08-15-19.jpg)
![](https://rennlist.com/forums/members/domer911-albums-turbo-s-cabriolet-picture25957-z2014-05-25-08-13-55.jpg)
#1180
Rennlist Member
#1181