No Front Plate Ticket
#3
Rennlist Member
Join Date: Apr 2003
Location: Westchester, NY Sarasota, FL
Posts: 445
Likes: 0
Received 3 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by JDC48
Can I get a ticket for not having a front plate if my car is registered in NY but I am in New Jersey.
#4
Poseur
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Some time post a shot of the front end with that mount. I have a different design which also spares the drill-through-paint routine. Not good for tiptronic and X51 users however,--it goes over the central air intake.
#5
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by RAKLAW
I ran around for a while without one, but driving through all the villages in Westchester with the full on hack with PSE it was not worth the aggravation of getting pullled over with probable cause (No front plate). I put on the "lawn mower" gizzmo and now I dont even think about it. Actually I think it looks cool, off to the side like that.
#6
Trending Topics
#9
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by RAKLAW
I ran around for a while without one, but driving through all the villages in Westchester with the full on hack with PSE it was not worth the aggravation of getting pullled over with probable cause (No front plate). I put on the "lawn mower" gizzmo and now I dont even think about it. Actually I think it looks cool, off to the side like that.
![crying](https://rennlist.com/forums/graemlins/bigcry.gif)
#10
Poseur
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Rather than drill holes in the bumper I drilled 4 holes in the top area of the center grill filler panel, and put in 4 bolts to which I installed a couple of hinge assemblies. To that I attached the plate mount,--which is what the plate is mounted to. When removed you don't see a thing. The only impact is to those with a Tip and/or an X51 package which used the center for cooling.
#11
Intermediate
Join Date: Dec 2006
Location: Burlingame, CA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have Larry's kit. I haven't installed it yet, due to the fact that California is a little slow sending me my license plates. I will say the kit is well made and cleanly implemented.
#13
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Stephenkng
#14
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
JDC48 - If your car is principally garaged in NJ, but registered in NY, you run the risk of bigger problems if your car is involved in an accident. The vast majority of cops in NJ will not pull you over for no front plate, but it certainly gives them a reason if they want to.
Very truly yours,
Debbie Downer
Very truly yours,
Debbie Downer
#15
Poseur
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's a shot of my work in progress on a no drill front plate arrangement. Will provide updates as time permits.
Four stainless steel bolts are secured in the center filler panel to which to mount the plate adapter which is under construction. I'm presently using a pair of hinges to mount the plate temporarily.
Four stainless steel bolts are secured in the center filler panel to which to mount the plate adapter which is under construction. I'm presently using a pair of hinges to mount the plate temporarily.
Last edited by Edgy01; 01-09-2007 at 01:06 AM.