My PDK just died again
#46
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
At least look at the cost to fix it, and then decide if you want to sell.
#48
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Broken clock can be right twice a day... They are right in this - temperature errors are secondary. And 0730 points to a failed speed sensor. By not gettin the right shaft speed values on two sides of a drivetrain - car thinks that ratio is wrong, throws 0730 and goes into limp mode to protect the PDK.
Those particular sensors are not available from Porsche, and dealers will not do the repairs. But we manufacture this sensor and we can recommend the PDK repair shops if you contact us directly.
Those particular sensors are not available from Porsche, and dealers will not do the repairs. But we manufacture this sensor and we can recommend the PDK repair shops if you contact us directly.
Regardless, speed sensor, temp sensor, or clutch it's all fixable. And fixable at far less than the hit Larry would take selling it as a roller.
#49
Rennlist
Basic Site Sponsor
Basic Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yep any and all of those repairs would be FAR less than replacement. Waiting to hear back from Larry - would love to help him get back on the road and be happy with his whip. 50+ years of PCA is no small feat.
__________________
Todd Lamb
Atlanta Speedwerks
www.ATLspeedwerks.com
Porsche repairs, servicing, and upgrades / Certified IMS installer / PDK repair experts
Over 150 PDK's repaired and counting: https://youtu.be/m54P_zisEcI
Todd Lamb
Atlanta Speedwerks
www.ATLspeedwerks.com
Porsche repairs, servicing, and upgrades / Certified IMS installer / PDK repair experts
Over 150 PDK's repaired and counting: https://youtu.be/m54P_zisEcI
#50
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Respect your opinion Vlad as I know you have done a lot of work on this. Completely agree the ratio fault would normally indicate a speed sensor failure (and I noted this above) but I cannot wrap my head around the three overtemp faults. Why would a speed senor failure cause this? That's why I was thinking a clutch failure. Perhaps the speed sensor is fine and there really is a speed mismatch from the clutch slipping. That would heat up the clutch fluid quickly.
Regardless, speed sensor, temp sensor, or clutch it's all fixable. And fixable at far less than the hit Larry would take selling it as a roller.
Regardless, speed sensor, temp sensor, or clutch it's all fixable. And fixable at far less than the hit Larry would take selling it as a roller.
![](https://cimg6.ibsrv.net/gimg/rennlist.com-vbulletin/1056x892/screenshot_2023_07_19_07_17_09_33ce7b912bac363bc62b2d5e025d25a2da6df482.png)
#51
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The knowledge displayed on this thread is just another reminder of why this forum is so good. Probably the best on the web.
OP, hope this works out for you.
OP, hope this works out for you.
The following 3 users liked this post by Patrick E:
#52
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I appreciate all the suggestions I have received from you all.
As I have said I’m getting too old to fight.
14 years of joy and all the extras I personally put into this car allow me to look back on it with joy.
But. For me, the time has passed.
of course I welcome any bids, however, I am no longer interested in repair.
thanks again.
larry T
As I have said I’m getting too old to fight.
14 years of joy and all the extras I personally put into this car allow me to look back on it with joy.
But. For me, the time has passed.
of course I welcome any bids, however, I am no longer interested in repair.
thanks again.
larry T
Last edited by larrytrk; 07-19-2023 at 09:54 AM.
The following users liked this post:
jbkusa (07-19-2023)
#53
#54
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I appreciate all the suggestions I have received from you all.
As I have said I’m getting too old to fight.
14 years of joy and all the extras I personally put into this car allow me to look back on it with joy.
But. For me, the time has passed.
of course I welcome any bids, however, I am no longer interested in repair.
thanks again.
larry T
As I have said I’m getting too old to fight.
14 years of joy and all the extras I personally put into this car allow me to look back on it with joy.
But. For me, the time has passed.
of course I welcome any bids, however, I am no longer interested in repair.
thanks again.
larry T
#55
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
thanks for the message, I have appreciated all the interactions I’ve had over all these years and I will miss it!
#56
Nordschleife Master
#57
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I appreciate all the suggestions I have received from you all.
As I have said I’m getting too old to fight.
14 years of joy and all the extras I personally put into this car allow me to look back on it with joy.
But. For me, the time has passed.
of course I welcome any bids, however, I am no longer interested in repair.
thanks again.
larry T
As I have said I’m getting too old to fight.
14 years of joy and all the extras I personally put into this car allow me to look back on it with joy.
But. For me, the time has passed.
of course I welcome any bids, however, I am no longer interested in repair.
thanks again.
larry T
I'm sorry you had to deal with this and hope you shop for a 997 soon!
Last edited by groovzilla; 07-19-2023 at 03:09 PM.
#58
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Respect your opinion Vlad as I know you have done a lot of work on this. Completely agree the ratio fault would normally indicate a speed sensor failure (and I noted this above) but I cannot wrap my head around the three overtemp faults. Why would a speed senor failure cause this? That's why I was thinking a clutch failure. Perhaps the speed sensor is fine and there really is a speed mismatch from the clutch slipping. That would heat up the clutch fluid quickly.
Regardless, speed sensor, temp sensor, or clutch it's all fixable. And fixable at far less than the hit Larry would take selling it as a roller.
Regardless, speed sensor, temp sensor, or clutch it's all fixable. And fixable at far less than the hit Larry would take selling it as a roller.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
__________________
T-Design9 : Mods and ergonomic accessories bespoke designed for Porsche cars
Memory Modules : remember SC **** settings; A/S/S, PSE, Spoiler, Sport/+ buttons
Phone Mounts : keep your phone up and close and charged
Cupdholders, Sunglass Holsters and more at T-Design9.com
T-Design9 : Mods and ergonomic accessories bespoke designed for Porsche cars
Memory Modules : remember SC **** settings; A/S/S, PSE, Spoiler, Sport/+ buttons
Phone Mounts : keep your phone up and close and charged
Cupdholders, Sunglass Holsters and more at T-Design9.com
#59
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Good point. As was noted above, using the PIWIS to read the real-time speed sensor and temp sensor data could probably sort this out pretty quickly. Dealers won't do it though despite the fact the capability is built right into the tools they have.
#60
Nordschleife Master