When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's some damn fine welding. Who did that for you?
Cantrell Motorsports in Bellevue did it. They also make a pressure test kit for people or shops who choose to pin/weld it on their own, so you can pressure test it before bolting everything back into the car.
Been chasing vibrations at high speeds... Balanced tires twice checked air pressure... Rotated... Removed spacers cleaned all mating surfaces wire spinny drill brush... Finally removed spacers and mounted... No vibration at all. Wierd how 7/15mm spacers would turn my car into a vibrator.
Been chasing vibrations at high speeds... Balanced tires twice checked air pressure... Rotated... Removed spacers cleaned all mating surfaces wire spinny drill brush... Finally removed spacers and mounted... No vibration at all. Wierd how 7/15mm spacers would turn my car into a vibrator.
might have been my longer bolts...
Are they quality spacers? Put some chinese ones on a caliper and you'll see the hub bore isn't exact which will let you feel it at speed as it's accentuated. I only run Adaptec Speedware. They are USA made and a good price.
Are they quality spacers? Put some chinese ones on a caliper and you'll see the hub bore isn't exact which will let you feel it at speed as it's accentuated. I only run Adaptec Speedware. They are USA made and a good price.
H&R spacers. Im pretty sure its the bolts that i got.
I cbf to put the spacerw back on, im enjoying the loose back end too much lol.
got my cv boots front and rear. 150$ worth of parts is 8 hours of labor. all part of the joy.
also found a state hwy that allows me to open her up and avoid the mini-vans. hooray for me.
"It was the bestoftimes, it was the worstoftimes, it was the age of wisdom, it was the age of foolishness, it was the epoch of belief, it was the epoch of incredulity it was the season of Light, it was the season of Darkness, it was the spring of hope, it was the winter of despair," - Charles Dickens - A Tale of Two Cities
Finished my DIY paint job on the center console. Pleased for the $60 in cost. I always felt like it was needed to tie in the original build options of arctic silver the car came with. Color match was spot on from automotive touchup.
Hi guys,
I just picked this up before the EPA shuts everything down. These are made in Taiwan and I think very good quality and great price. We shall see. I'll try to post a review.
Jon Che is a good guy... yes his stuff is taiwan made and usually copies but he is local in Dallas and honors his warranty... he did a lot of stuff for the MR2s that couldn't be obtained anymore so many of the owners were grateful for his service/alternative...
03-24-2021, 10:09 PM
