EVOMS Intake Installed - UPDATED Page 3
#46
Technical Guru
Rennlist Member
Rennlist Member
Any chance someone could do a videotaped acceleration run, with and without the plastic drainage pipe hooked up (and at something less than 140mph)?
#47
Originally Posted by vividracing
Well this is the dyno of a stock 996 3.6L without intake, with intake, and with GIAC tune.
http://www.vrsm.vividracing.com/main/evoms996dyno.jpg
And here is the TORQUE DYNO of the same car...
http://www.vrsm.vividracing.com/main/evoms996dyno.jpg
And here is the TORQUE DYNO of the same car...
Perhaps we can get Bruce Anderson to do a proper intake only dyno for old times sake.
#48
Former Vendor
Thread Starter
Join Date: Nov 2004
Location: Gilbert, AZ
Posts: 1,279
Likes: 0
Received 0 Likes
on
0 Posts
Listen man... I am not EVO, I do run the product and know there history. I do back there product and our history of vehicle building will truly show we do not use crap. Either you have bad blood against EVO or just like to question things...either is fine, email them directly if you have a problem. I have posted all requested information and done my part to promote a high quality product. So please have courtesy and not ruin our post.
BTW what do you drive and what do you have on your car???
BTW what do you drive and what do you have on your car???
#49
Originally Posted by vividracing
Listen man... I am not EVO, I do run the product and know there history. I do back there product and our history of vehicle building will truly show we do not use crap. Either you have bad blood against EVO or just like to question things...either is fine, email them directly if you have a problem. I have posted all requested information and done my part to promote a high quality product. So please have courtesy and not ruin our post.
BTW what do you drive and what do you have on your car???
BTW what do you drive and what do you have on your car???
#51
Addict
Rennlist Member
Rennlist Member
Join Date: Dec 2001
Location: SF bay area, CA
Posts: 2,094
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Re-animator
Nothing personal, just the pursuit of truth in advertising. In any case you could see my challenging posts as a way to get customers to buy the chip/intake combo to get the gains posted in the dyno. I drive an '02 Carrera Coupe and an '03 AMG C32. I like evoms and have done good business with Brian in the past. It appears that the only one claiming the posted dynos are "intake only" is you, Dan. You've got $6K on V flow inventory sitting there, why not do a dyno and win over the sceptics? I hope you can appreciate my efforts here at some level, but I'll check out of this thread to demonstrate my passion is not against anyone, but simply for truth in advertising. Peace.
i will be dynoing this weekend but unfortunately it will reflect all the mods i have done.
#52
Rennlist Member
I had the V1 on my old 996(3.4 with non egas) and I do like the induction roar but for some reason and maybe it doesn't affect EGAS cars(don't know why) but I had hicccuping at steady cruising on freeway from 3500-4500 rpm and it gets worse going downhill. That's my experience with it but at the track never had that going on since I'm up at higher rpm's. Regards. Mike
#53
Former Vendor
Thread Starter
Join Date: Nov 2004
Location: Gilbert, AZ
Posts: 1,279
Likes: 0
Received 0 Likes
on
0 Posts
Prices have been PM.
ReAnimator...appreciate your persistance, and trust me...we have over $500K in parts, so the couple intakes are not a problem... My point is they make power with or without a chip. And that is why we have now posted both dynos. As far as us have a dyno...we do, its on the way to our 10000sqft shop. So I guess when it is installed in mid June, I will personally do before and afters. But I think EVOMS claims are safe enough. Nothing personally either, I am just trying to promote products.
As far as the V1, it was good, but needed improvement, hence the V2
ReAnimator...appreciate your persistance, and trust me...we have over $500K in parts, so the couple intakes are not a problem... My point is they make power with or without a chip. And that is why we have now posted both dynos. As far as us have a dyno...we do, its on the way to our 10000sqft shop. So I guess when it is installed in mid June, I will personally do before and afters. But I think EVOMS claims are safe enough. Nothing personally either, I am just trying to promote products.
As far as the V1, it was good, but needed improvement, hence the V2
#55
Three Wheelin'
#58
Former Vendor
Thread Starter
Join Date: Nov 2004
Location: Gilbert, AZ
Posts: 1,279
Likes: 0
Received 0 Likes
on
0 Posts
PM's and emails have been sent. Patiently waiting return PM's and emails.
Anyone want a Fabspeed Exhaust or B&M short shifter? I got 5 of each instock. PM me!
Anyone want a Fabspeed Exhaust or B&M short shifter? I got 5 of each instock. PM me!