Chunks slow build... very slow.
#571
Rennlist Member
Thread Starter
I'll check them out now that you mentioned them. Didn't realize there was a market for this, I bought a limited edition Miami F1 poster that was limited to 2022 prints for around $70 shipped. At the time I thought it was a lot and when it arrived at my GFs house... she thought it was beautiful but surprisingly didn't see an issue with the price. They're selling for 275.00 - 350.00 on eBay and Mercari, guess there's a buyer for anything.
The following users liked this post:
Justin76 (05-23-2022)
#572
Rennlist Member
I'll check them out now that you mentioned them. Didn't realize there was a market for this, I bought a limited edition Miami F1 poster that was limited to 2022 prints for around $70 shipped. At the time I thought it was a lot and when it arrived at my GFs house... she thought it was beautiful but surprisingly didn't see an issue with the price. They're selling for 275.00 - 350.00 on eBay and Mercari, guess there's a buyer for anything.
#573
Rennlist Member
Thread Starter
First one arrived! I'll be looking to reframe it, probably framed in 1986.
Last edited by TheChunkNorris; 05-25-2022 at 01:16 PM.
The following 3 users liked this post by TheChunkNorris:
#574
thats awesome!
#576
Rennlist Member
Thread Starter
Picked up a different one today, it's a 30"x40" and advertised as a showroom victory poster.
#577
Race Car
These are super cool !
The following users liked this post:
TheChunkNorris (05-31-2022)
#578
Rennlist Member
Thread Starter
Well guys it looks like we'll need to update the Dragon timeframe. I'm getting extended to the end of October now and hopefully that's the only extension I'll be making. So with all that said, I'm aiming for the for the first weekend of December unless the weather is trash in that area at that time. Any advice from the guys live in the area?
On a lighter note I found the last poster I needed for the garage. Found the official poster from 1985 and the Coca Cola poster is the Promotional poster, had no idea there was a difference.
After looking through the parts I have, these are the ones I'm missing:
Camber Plate set (F) = Tarett($450) - OEM(425)Inner Control Arm Mono set = DSM(480)
LCA shims = N/A
Almost at the finish line with the parts I need and I might as well buy rear LCAs as well but don't think they need to be adjustable.
On a lighter note I found the last poster I needed for the garage. Found the official poster from 1985 and the Coca Cola poster is the Promotional poster, had no idea there was a difference.
After looking through the parts I have, these are the ones I'm missing:
Camber Plate set (F) = Tarett($450) - OEM(425)Inner Control Arm Mono set = DSM(480)
LCA shims = N/A
Almost at the finish line with the parts I need and I might as well buy rear LCAs as well but don't think they need to be adjustable.
#579
Rennlist Member
Thread Starter
Got around to buying a set of Demon Speed branded LCA inners and also bought the Shift Right kit along with a 997 alignment tool. Once I get the shims, I'll have all the parts needed for the LCAs. Probably looking to start with these widths for shims with Aaron recommending extra sets of 10mm if I want to go past 1 degree of camber:
4x1mm
4x3mm
2x6mm
2x10mm
Starting to get pretty excited now that I'm half way through this deployment and have most of the parts I'll need to lower the car, should have that done the first week I'm home.
4x1mm
4x3mm
2x6mm
2x10mm
Starting to get pretty excited now that I'm half way through this deployment and have most of the parts I'll need to lower the car, should have that done the first week I'm home.
The following 6 users liked this post by TheChunkNorris:
EVOMMM (07-08-2022),
plpete84 (07-08-2022),
Ratchet1025 (07-08-2022),
Type65 (07-08-2022),
wdb (07-09-2022),
and 1 others liked this post.
#580
Rennlist Member
Thread Starter
The following users liked this post:
barbancourt (07-10-2022)
#581
Got around to buying a set of Demon Speed branded LCA inners and also bought the Shift Right kit along with a 997 alignment tool. Once I get the shims, I'll have all the parts needed for the LCAs. Probably looking to start with these widths for shims with Aaron recommending extra sets of 10mm if I want to go past 1 degree of camber:
4x1mm
4x3mm
2x6mm
2x10mm
Starting to get pretty excited now that I'm half way through this deployment and have most of the parts I'll need to lower the car, should have that done the first week I'm home.
4x1mm
4x3mm
2x6mm
2x10mm
Starting to get pretty excited now that I'm half way through this deployment and have most of the parts I'll need to lower the car, should have that done the first week I'm home.
#582
Rennlist Member
Thread Starter
Worst part about all of that is not buying all the parts in one shot! I'm sprinkling in some purchases over the 6 months so it's not a burden on my girlfriend. Big heavy parts go to my buddy's shop in Cutler Bay but he's also running a business and I'm not really trying to abuse that privilege.
The following users liked this post:
barbancourt (07-11-2022)
#583
Nordschleife Master
Feel free to ship any new wheels, posters or other cool stuff to me. Happy to "store" them 4 u.
The following 2 users liked this post by De Jeeper:
barbancourt (07-11-2022),
wdb (07-10-2022)
#584
Rennlist Member
Thread Starter
#585