Agency Power Headers
03-24-2021, 06:00 PM
#91
Nordschleife Master
its drilling it out each bolt with 2 different sizes and then running the tap up. U just dont want to go too deep but thats not a huge issue. I marked the drill bit and the bolt it about 5mm shirt of the bottom of the hole so u know when u get through it.
just take your time and make sure its clean and clear when done.
i still needed to helicoil 2 holes so u may want to buy that kit before u start.
just take your time and make sure its clean and clear when done.
i still needed to helicoil 2 holes so u may want to buy that kit before u start.
The following users liked this post:
motoo344 (03-25-2021)
03-24-2021, 06:01 PM
#92
The jig is just there to help you drill accurately to remove what's left of the bolts (I haven't done this yet, it's observation). If I was to remove these bolts, I'd probably get some studs and use a lot of anti seize compound on both ends.
The following users liked this post:
motoo344 (03-25-2021)
03-24-2021, 11:40 PM
#93
Instructor
its drilling it out each bolt with 2 different sizes and then running the tap up. U just dont want to go too deep but thats not a huge issue. I marked the drill bit and the bolt it about 5mm shirt of the bottom of the hole so u know when u get through it.
just take your time and make sure its clean and clear when done.
i still needed to helicoil 2 holes so u may want to buy that kit before u start.
just take your time and make sure its clean and clear when done.
i still needed to helicoil 2 holes so u may want to buy that kit before u start.
I’m still debating whether I go for it, or take the car to a muffler shop to have the headers installed.
It’s a tough call, because those exhaust manifold bolts are RIGHT THERE..... So easy to access. It looks so tempting.
03-25-2021, 01:09 AM
#94
Nordschleife Master
Man i wouldnt let a muffler guy touch my car with a 39 and a half foot pole. Those guys are bottom of the barrel usually. Have a decent indy do them at a minumum.
The following users liked this post:
KellyMN (03-25-2021)
03-25-2021, 07:54 AM
#95
Ordered a pair
I went to the vivid racing site after following this thread since it started. I am slowly collecting parts to modify intake and exhaust next year. they are sold out on the vivid site but I found them for $585 on the horsepower freaks (or something like that) site. That site is linked to vivid racing and you even send the epa waiver to vivid.
Just an aside that I enjoy the conversational minor diversions into topics like slow cooked meat. Let’s keep some personal character to a site that links people from all over the world who share one common interest but also have other interests.
Just an aside that I enjoy the conversational minor diversions into topics like slow cooked meat. Let’s keep some personal character to a site that links people from all over the world who share one common interest but also have other interests.
The following users liked this post:
nrp3 (03-25-2021)
03-25-2021, 05:54 PM
#96
Since travel is kind of tough right now, being able to talk about almost anything with other enthusiasts is a good substitute. Have reservations at a hotel in the UK in Port Isaac for August and hoping it opens up. Due for my first shot on the 9th.
03-25-2021, 08:41 PM
#97
RL Community Team
Rennlist Member
Rennlist Member
03-25-2021, 09:39 PM
#98
My wife has been there during the last round of tv filming. Has quite a following on Facebook related to the show and travel there. Looking forward to getting there at some point.