Another Engine Mount Question
#16
Rennlist Member
I got my RS mounts from Carnewal. The set came with the mounts, the 2 large bolts, 2 large nuts, and the 8 washers (4 large, 4 thick) associated with the main bolt. I reused the 4 13mm bolts and their washers for the top of the mount.
#17
Three Wheelin'
On the bright side, the rear end feels extremely tied down.
#18
No, its all part of the kit from Sunset...Other than the top 4 mount fasteners.
#19
I just replaced the OEM mounts with the RS mounts at 38k, original mounts were in poor shape.
I don't notice any significant increase in noise or vibration.
I'd replace the bolts.
I don't notice any significant increase in noise or vibration.
I'd replace the bolts.
#20
Rennlist Member
What's the noise coming from? A worn AC compressor bearing?
#22
Rennlist Member
Join Date: Jul 2014
Location: Toronto, Canada
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
I will say the difference is pretty startling! The handling is now easily as good as my Cayman S (which is a good thing!) and the car feels extremely "planted" in every situation I've thrown at it so far. Shifter feel is a bit better, too, which is a nice side effect. To me, the increase in NVH is very minimal.