Railmaster.

Dear fellow rennlisters!

Found this round piece of plastic in the frunk but can't find out were to fit it!
I think it belongs to the car but one never knows!

Does anyone here know or shall we guess together?



The mysterious piece of plastic to the left!

P-daddy

May help if you post pic of other side too

nine9six

Thought I knew, but I was wrong...

TJ993

HAVE U RECENTLY CHANGED ANYTHING?

did the 30,000 MAINTENANCE ?

Looks like the Pollen filter Nut -

For a closer look - here is a Link on P car DIY

http://p-car.com/diy/pollen/pollen.htm

TJ

TJ993

HAVE U RECENTLY CHANGED ANYTHING?

did the 30,000 MAINTENANCE ?

Looks like the Pollen filter Nut -

For a closer look - here is a Link on P car DIY

http://p-car.com/diy/pollen/pollen.htm

TJ

bobbyp

Good eye TJ. I agree.
Those things are tough to line up and get on correctly.

Vandit

I found a couple of these pieces laying around behind the firewall when I did my evaporator replacement. I'm not certain but perhaps it is used when attaching the plastic cover that goes near the cowel, covering up the servos and all that busy stuff.

Vorsicht

My vote also: Knurled Nut, part no. 90024100302

Railmaster.

There are no threads in the plastic piece and it's black so it's not a knurled nut!

kjr914

Random guess, but is it the receptacle for the front carpet fastener right behind the bumper? Fastener shown in this thread:
https://rennlist.com/forums/993-foru...-fastener.html

999 025 236 40 washer
pg 267/437 in 993_USA_KATALOG.pdf

Vorsicht

I don't think that's it either. I just installed those in my frunk and they look like this:

Vorsicht

Double Post

nine9six

I initially thought the fresh air cover knurled nut, but its not plastic, and does not have an angled counersink. See post #3.