Gator06

Any issue with the cruise control? Did you use the ballast?

FWIW, I too have the Koni/M033 setup and am happy. It settled slightly after a few weeks. Didn’t realize we could adjust lower- might have that done some day. I added 7mm spacers from Fister at all 4 corners, there’s enough thread to support those and I haven’t had any issue with the lugs not being properly torqued. It’s not that drastic of a difference but does improve the look.

I’ll never track the car, so that’s not a consideration.

sbsurfer

Took the 993 out for a hour long cruise through some twisties...such a damn fun car. Stoked on the addition of Fister 2's over the stock sound...tempted to go to Fister 3's

MC 968CS

Oh you have a bottle holder! Where can I purchase one? @sbsurfer

SwayBar

Go ahead and buy them - if they're too loud you can reinstall the 2's and sell the 3's.

sbsurfer

Can’t remember exactly where I bought it but it looks like this.

boxcarracer

This looks like a Rinashi/patinahandle cup holder - he also started to make phone holders recently.

Runner

Ordered OEM Speedline Wheels from Suncoast Porsche Parts. On sale for $9,999.00. Also, installing RS Clubsport kit. Should be done by September.

os993

wow. Nice. What does the RS clubsport kit include/entail?

Grapeape

I don't believe you so prove it before and after pics.

Runner

Thank you!

I'll do my best. For the exterior, the RS Clubsport is basically a C2 NB with a wing, splitter, Speedline Wheels and RS side skirts.

This is the wing.
https://www.fvd.net/us-en/9935121190...for-paint.html

The front lip splitter is:
https://www.fvd.net/us-en/FVD505498/...nal-style.html

The side skirts are:
https://www.suncoastparts.com/produc...3RSSKIRTS.html

alsamrob4

Re-installed a replacement spoiler wall after the original broke along both seems after 2 months of use.




It get easier every time you do it, but I don't want to do it ever again. Shootout to Stoddard for the quick replacement (no affiliation)

abiazis

Was the spoiler Porsche brand OEM or an aftermarket replacement? I have heard the replacements are harder to install due to not being exactly on spec to the OEM.....2 months is really unacceptable......

alsamrob4

Aftermarket. The install wasn't all that bad, but doing it 2x in 2 months was no bueno. When this one goes, I'll get the OEM.

MrRoboto

Drove around a bit, slowly chipping away at my 1k engine break-in period since I got my car back after a 28 month 3.8 rebuild last week...and reinstalled my antigravity battery.

Mr.Woolery

Went to the Good Vibes Breakfast Club meet for the first time yesterday, and got my 993 smog checked today (passed with super clean numbers).