Official Tie Rod Pinning Tool Wait List Thread
#61
Rennlist Member
Note; due to budgetatry restraints, I've had to let my peoples go, and the light at the end of the tunnel has also been shut off.
#63
Garth, Looking forward to hearing from you when you get the Jig. I hope they don't take the $38,000 Seriously, they don't fool around at the border hower this may just be in the hands of a courier and they might not know but it could be gold. . .well it is in a way. . .
Magdaddy, You could have delivered that Jig to Nova Scotia and brought along the beer, garth and I wpould have helped you out of a lot of that cool stuff. . .don't have to be behind a wheel to enjoy a cool one!!!
Looking forward to a tighter steering setup. . .
Cheers. . .
Magdaddy, You could have delivered that Jig to Nova Scotia and brought along the beer, garth and I wpould have helped you out of a lot of that cool stuff. . .don't have to be behind a wheel to enjoy a cool one!!!
Looking forward to a tighter steering setup. . .
Cheers. . .
#65
Three Wheelin'
Just heard from Andreas, He is sending it to me next. I am in Concord NH. If anyone is interested in coming by, I have a mid rise lift and Im happy to host a tie rod pinning party one night.
#66
Rennlist Member
Jig arrived Fri .... thanks!
It remains in good condition, considering the years of travel: the pilot hole was well out of round, but a re-ream with a 1/4" drill on the drill press, and all is tight on the 'diameter' line for continued use - good as new .... Lloyd's car will be next.
#67
I had a DE today with my recently pinned tie rods and I can confidently report that the steering was wicked accurate. I can't seem to find the actual data; it was around here somewhere.
#69
Three Wheelin'
I am heading out to the garage to do this now. I ran through the thread and the list seems to be (and please correct me if I am wrong)
1978formosa (previously contacted w no response registered)
Serval
Flyingchappy
jcochran1
ashirji
falcondrvr
lcorkum
aow162435
initial
simpsoap
Any issues with the list? I will contact each starting with 1978formosa and move on from there.
Jim
1978formosa (previously contacted w no response registered)
Serval
Flyingchappy
jcochran1
ashirji
falcondrvr
lcorkum
aow162435
initial
simpsoap
Any issues with the list? I will contact each starting with 1978formosa and move on from there.
Jim
#70
Rennlist Member
I am heading out to the garage to do this now. I ran through the thread and the list seems to be (and please correct me if I am wrong)
1978formosa (previously contacted w no response registered)
Serval
Flyingchappy-done
jcochran1
ashirji
falcondrvr
lcorkum
aow162435-done
initial
simpsoap
Any issues with the list? I will contact each starting with 1978formosa and move on from there.
Jim
1978formosa (previously contacted w no response registered)
Serval
Flyingchappy-done
jcochran1
ashirji
falcondrvr
lcorkum
aow162435-done
initial
simpsoap
Any issues with the list? I will contact each starting with 1978formosa and move on from there.
Jim
#74
Three Wheelin'
I sent it out this am to jcochran1.
New list
ashirji
falcondrvr
lcorkum
initial
simpsoap
I broke one of the two drill bits and would like to replace it. Around here my choice is Lowes and Home Depot. Any suggestions where I can get a good quality bit online and ship it to jcochran1?
New list
ashirji
falcondrvr
lcorkum
initial
simpsoap
I broke one of the two drill bits and would like to replace it. Around here my choice is Lowes and Home Depot. Any suggestions where I can get a good quality bit online and ship it to jcochran1?