dlinzy993

What ever became of the bumperette's ?

d

John Rygg

I think they would be possible to model . But I have a 964 with a different bumper. if anyone has plugs they want to lend me I will give it a go.
or if someone wants to lend me their 993 I would be game for that also, but I think I would have to hang on to it for a few miles quite a few it was a turbo ....

John Rygg

Ok I have a better idea of what a whole button looks like .
I have 2 versions
1 with a raised snowflake
1 with a cut snowflake that would let light shine through. (with a some paper behind it I think it would work.






I will send the CAD files off to quacktoduck who has access to a professional printer to see how they come out.

if they work I will load them on shapeways and they can be printed in metal.

John

x50type

Good work, John

Thanks

JB 911

what if you only cut the snowflake 1mm deep so you could put some white paint in there and wipe the surface clean. Just idea...

John Rygg

That would be easy as well. But you would loose the lit button.

JB 911

Hmmm... good point.

John Rygg

Hi all , I got a report of a rennlister with one of my phone holders had an issue with a holder that was left in the car during a very hot day.

The Holder shrank slightly due to the heat, making the phone harder to slide in.
The plastic that I use melts in the printer at 350 Degrees F and has a heat deflection temp of 140 degrees (that is the point where it will start to soften).

The ashtray part does not seem to be affected , but the phone holder is thin enough to change its shape slightly.

If you have one of my holders please take it inside with you during extremely hot days.
This is the first I have seen of this, but I am sending a new holder to the rennlister that told me of the issue.

I am also looking at plastic that is dishwasher safe and can handle high temps.

Thanks
John

quacktoduck

hey john gonna get the prints out this week.

ill send them out as soon as i get them from one of my engineers.

thanks

John Rygg

Great ! can't wait to see what they look like.

Thanks!
John

John Rygg

Playing with some new flexible filament , comes out with the properties of rubber


here is one of my cell phone holders printed with it

quacktoduck

Here are the Prints in ABS on the Stratysis







John i will be sending these out later today. pictures kind of suck. you can increase the hardness by dunking them in acetone. feel a bit flimsy

thanks

John Rygg

Thanks as soon as I get them I will compare them with the actual button.

here is an earlier design I sent off to shapeways.com to see how their prints come out.
the print was about $4 and the plastic seems pretty sturdy .

the tabs on this old design was not correct , but the ones that I sent to QuacktoDuck are.

dabbed this one in paint to see the snowflake.
Getting closer

John Rygg

x50type

John

It's looking good.