Soul Sport Cats installed in my C4...
#166
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Completed my install today. 40 minutes for driver side and 20 for passenger. All the notes above were helpful.
Both bolts facing the wrong way. A bit of WD-40 and vice grips on the tip and they came out easy. Switched clamps around.
O2 sensor I used a 22 mm open end head that you can use a ratchet with. Both came out easy.
impressions:
induction sounds are clear and louder. I believe it is louder in sport. The burbles are more pronounced.
Overall very happy with it and a breeze to install.
Both bolts facing the wrong way. A bit of WD-40 and vice grips on the tip and they came out easy. Switched clamps around.
O2 sensor I used a 22 mm open end head that you can use a ratchet with. Both came out easy.
impressions:
induction sounds are clear and louder. I believe it is louder in sport. The burbles are more pronounced.
Overall very happy with it and a breeze to install.
The following 3 users liked this post by TK42ONE:
#167
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Completed my install today. 40 minutes for driver side and 20 for passenger. All the notes above were helpful.
Both bolts facing the wrong way. A bit of WD-40 and vice grips on the tip and they came out easy. Switched clamps around.
O2 sensor I used a 22 mm open end head that you can use a ratchet with. Both came out easy.
impressions:
induction sounds are clear and louder. I believe it is louder in sport. The burbles are more pronounced.
Overall very happy with it and a breeze to install.
Both bolts facing the wrong way. A bit of WD-40 and vice grips on the tip and they came out easy. Switched clamps around.
O2 sensor I used a 22 mm open end head that you can use a ratchet with. Both came out easy.
impressions:
induction sounds are clear and louder. I believe it is louder in sport. The burbles are more pronounced.
Overall very happy with it and a breeze to install.
-Mike
__________________
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
![](https://rennlist.com/forums/signaturepics/sigpic191275_4.gif)
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
![](https://rennlist.com/forums/signaturepics/sigpic191275_4.gif)
The following users liked this post:
TK42ONE (02-09-2021)
#169
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The aesthetics of the Soul are so nice, its a shame we can't see it constantly. Definitely a mod thats worth it for the results and the breeze of an install.
For anyone that has any questions or would like a quote for a Soul unit, please free to reach out to me at anytime!
213 394 2886.
-Josh
For anyone that has any questions or would like a quote for a Soul unit, please free to reach out to me at anytime!
213 394 2886.
-Josh
__________________
![](https://www.clublexus.com/forums/signaturepics/sigpic167102_16.gif)
Your #1 Dealer for Aftermarket Performance Products
BC Forged / Soul Performance / Akrapovic / Bilstein / HRE / AL13 / CSF + more
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
![](https://www.clublexus.com/forums/signaturepics/sigpic167102_16.gif)
Your #1 Dealer for Aftermarket Performance Products
BC Forged / Soul Performance / Akrapovic / Bilstein / HRE / AL13 / CSF + more
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
The following users liked this post:
Soul Performance (02-10-2021)
#170
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Doing this install tonight so reviewing everything I can to get a game plan in my head.
Has anyone had issues with winding up the O2 sensor wire when removing it? It seems like it would require several revolutions to take out which could damage the wire. I can't visually see where to disconnect it from the harness main so this seems like the only way?
Has anyone had issues with winding up the O2 sensor wire when removing it? It seems like it would require several revolutions to take out which could damage the wire. I can't visually see where to disconnect it from the harness main so this seems like the only way?
#171
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Doing this install tonight so reviewing everything I can to get a game plan in my head.
Has anyone had issues with winding up the O2 sensor wire when removing it? It seems like it would require several revolutions to take out which could damage the wire. I can't visually see where to disconnect it from the harness main so this seems like the only way?
Has anyone had issues with winding up the O2 sensor wire when removing it? It seems like it would require several revolutions to take out which could damage the wire. I can't visually see where to disconnect it from the harness main so this seems like the only way?
The following users liked this post:
but did you die (02-19-2021)
#172
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Doing this install tonight so reviewing everything I can to get a game plan in my head.
Has anyone had issues with winding up the O2 sensor wire when removing it? It seems like it would require several revolutions to take out which could damage the wire. I can't visually see where to disconnect it from the harness main so this seems like the only way?
Has anyone had issues with winding up the O2 sensor wire when removing it? It seems like it would require several revolutions to take out which could damage the wire. I can't visually see where to disconnect it from the harness main so this seems like the only way?
-Mike
The following users liked this post:
but did you die (02-19-2021)
The following users liked this post:
but did you die (02-19-2021)
The following users liked this post:
ribold01 (02-19-2021)
The following users liked this post:
Soul Performance (02-19-2021)
#176
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I watched that video yesterday @Zsamboki
Thanks for taking the time to make it...I hope your son got that t-shirt LOL!
Thanks for taking the time to make it...I hope your son got that t-shirt LOL!
As per the unstall, it is very easy to do. If you have questions, message me and I can walk you thru it. One of the easiest installs you can do to be honest.
The following 2 users liked this post by Zsamboki:
Meraki Autoworks (02-19-2021),
Soul Performance (02-19-2021)
#178
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
To go one step above to make a little little kid with something as small as a shirt shows you guys care about your community.
The following users liked this post:
Soul Performance (02-20-2021)