When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I guess, am not sure how much more hidden can it be, but you can try!
Nope, no drilling what so ever, this had 4 nuts that went onto the existing holes in the red bumper! nuts and bolts, no need to uninstall the bumper (again I have small hands that helped)
yes, if the lic plate is installed then yes the scrape point is lower, if there plate is not installed, and only the bracket is installed, then no difference. the front lip is still the lowest point.
If I had to put a front plate on, this would be the way I'd do it.
You drilled two holes in the skid plate but what do they attach to? Does the bracket from the vendor have two available holes to attach to, and the heads of the bolts don't interfere when you have to slide the bracket with the license plate into the receiver? Is your skid plate made of rubber?
adrianp89 (05-24-2024),bz_911 (05-28-2024),C21ban (05-25-2024),Honza (05-26-2024),Ray K. (06-01-2024),txpackers (05-25-2024) and 1 others liked this post. (Show less...)
2 year/20k Service at Porsche Beverly Hills - 1250 with the PCA discount.
they also did a Bose update for the Amp, that's out there. Sound improved I Was having some rattling in the back rear speaker, that's gone.
at the 1 year they replaced a front driver side speaker..
Macan T Loaner was nice ( not fast ) but incredibly solid, great seats. Liked it a lot.
Maybe get the electric one when my wife's Q4 lease is up..
nice! Stock is hard to heel and toe. Are brake and throttle almost "too close"? Does it result in accidental acceleration here and there? Hard to see but are they fully level or throttle a bit further down?
nice! Stock is hard to heel and toe. Are brake and throttle almost "too close"? Does it result in accidental acceleration here and there? Hard to see but are they fully level or throttle a bit further down?
I have same ones in black…easy install. Short shift next up I think! 🧐. Just unsure of spring setting should get OR if I should go with OEM one that is now avail from Suncoast Porsche. Decisions..Decesions along with whether to retrofit chalk seat belts or add SOUL cats/downpipes!
nice! Stock is hard to heel and toe. Are brake and throttle almost "too close"? Does it result in accidental acceleration here and there? Hard to see but are they fully level or throttle a bit further down?
I was missing the gas pedal all the time on this car, vs my F87 M2 or A91 Supra. Drove the 992 for 50 miles yesterday, wearing my Puma driving shoes (size 9), and didn’t miss the gas pedal once. It felt very intuitive to heel toe. Level didn’t change much from before. But, I wasn’t expecting that to change.
And didn’t feel too close together, at least not for me. Your mileage may vary, depending on your feet size and shoes.
Do you have to drill underneath to mount the STO-N-SHO? After reading/seeing alot of posts on front plate mounting, that's looking like the best option to me right now. But it does seem to sit below the front lip, so I guess it lowers the scrape point a little bit?
if it for me, no drilling, yes they have two long hollow pipes with a spring lock to take the two long pipes from the license plate part
05-24-2024, 10:06 AM
