S/T Owners
The following 3 users liked this post by Hmet:
The following 9 users liked this post by johnarpy:
cosmos (09-21-2024),
fester (09-21-2024),
JPMD (09-21-2024),
kyrocks (09-21-2024),
neoprufrok (09-21-2024),
and 4 others liked this post.
#93
#94
NICE! Especially next to that Speedster!! They say 992 end is going to be a Speedster based on S/T!!
One request: Can you please post the closeup pics of the PPF over the decals??? Thx!
One request: Can you please post the closeup pics of the PPF over the decals??? Thx!
#95
The following 2 users liked this post by johnarpy:
One...Day... (10-06-2024),
WernerE (09-21-2024)
#96
Last edited by johnarpy; 09-21-2024 at 08:55 PM.
The following 4 users liked this post by johnarpy:
#97
Does the S/T arrive at the dealer with the number already on the meatball? I was hoping to PPF over the meatball and then add the black numbers on top - in case I later want to change the number.
#98
Yes comes with number. Can order without number though and then put on different numbers. Porsche letter E is installed over clear rear stone guards, which looked strange. I had them PPF over everything which seemed to soften that portion.
The following users liked this post:
mhh (09-21-2024)
#99
how does this look in person? Your photo does not look like PPF is over the E and the stone guard.
I am most likely to rip off the letters are maybe reapply later after PPF. I prefer to put a sacrificial layer of PPF where the stock stone guard is located on top of the base layer so you can rip off and re apply every couple years
Last edited by vcp13; 09-21-2024 at 10:59 PM.
#100
Yes my PPF guy is a real OCD and said he will have to rip apart the stone guards from factory (he hates them due to not clean look) and in the process E gets sacrificed. I really want to preserve everything the way it is…
also I get the areas that get heavy rock chips beating double PPF’d.
I’ll also get the windshield protected this time
since it has a special light weight one (same as GT3RS?)
also I get the areas that get heavy rock chips beating double PPF’d.
I’ll also get the windshield protected this time
since it has a special light weight one (same as GT3RS?)
#101
#102
#104
how does this look in person? Your photo does not look like PPF is over the E and the stone guard.
I am most likely to rip off the letters are maybe reapply later after PPF. I prefer to put a sacrificial layer of PPF where the stock stone guard is located on top of the base layer so you can rip off and re apply every couple years
I am most likely to rip off the letters are maybe reapply later after PPF. I prefer to put a sacrificial layer of PPF where the stock stone guard is located on top of the base layer so you can rip off and re apply every couple years
#105
Yes my PPF guy is a real OCD and said he will have to rip apart the stone guards from factory (he hates them due to not clean look) and in the process E gets sacrificed. I really want to preserve everything the way it is…
also I get the areas that get heavy rock chips beating double PPF’d.
I’ll also get the windshield protected this time
since it has a special light weight one (same as GT3RS?)
also I get the areas that get heavy rock chips beating double PPF’d.
I’ll also get the windshield protected this time
since it has a special light weight one (same as GT3RS?)
The following 3 users liked this post by johnarpy: