Notices
992 GT3 and GT2RS Forum 2019-Current
Sponsored by:
Sponsored by:

Another lightweight glass broken - quarter panel

Thread Tools
 
Search this Thread
 
Old 06-06-2022, 11:54 AM
  #136  
Zero757
Instructor
 
Zero757's Avatar
 
Join Date: May 2021
Location: Bay Area
Posts: 185
Received 103 Likes on 54 Posts
Default

Originally Posted by n d
the glass still rubs the other window when I open the door
I don’t understand how they can say it is installed properly when it still does that. The gap between the two panels on my T is about 4mm…not even close to touching.
Old 06-06-2022, 12:36 PM
  #137  
LexVan
Banned
 
LexVan's Avatar
 
Join Date: Jan 2013
Location: Chicagoland Area
Posts: 26,141
Likes: 0
Received 5,404 Likes on 2,513 Posts
Default

Just measured mine. Very consistently 7mm top to bottom, and both driver's side and passenger side.


The following users liked this post:
Reece Harvath (07-22-2022)
Old 06-06-2022, 05:08 PM
  #138  
4carl
Race Car
 
4carl's Avatar
 
Join Date: Jan 2004
Location: santa barbara
Posts: 3,865
Received 1,141 Likes on 609 Posts
Default

Measured mine at both the top and bottom 9.87-9.32-9.81-8.32mm. actually pretty good for window adjustment ,1.5 mm range.carl




The following users liked this post:
Reece Harvath (07-22-2022)
Old 06-06-2022, 07:10 PM
  #139  
User 81423
Burning Brakes
Thread Starter
 
User 81423's Avatar
 
Join Date: Apr 2019
Posts: 1,148
Received 574 Likes on 344 Posts
Default

Originally Posted by 4carl
Measured mine at both the top and bottom 9.87-9.32-9.81-8.32mm. actually pretty good for window adjustment ,1.5 mm range.carl



I was hoping you would send us a measurement. Thanks Carl!
Old 06-06-2022, 07:11 PM
  #140  
User 81423
Burning Brakes
Thread Starter
 
User 81423's Avatar
 
Join Date: Apr 2019
Posts: 1,148
Received 574 Likes on 344 Posts
Default

Originally Posted by n d
the glass still rubs the other window when I open the door
Definitely take it back in for adjustment. You'll definitely be back for a broken one if they're rubbing.. and there seems to be zero stock nationwide now.
Old 06-06-2022, 10:29 PM
  #141  
chance6
Race Car
 
chance6's Avatar
 
Join Date: Jun 2018
Location: Somewhere out East
Posts: 3,798
Received 1,500 Likes on 961 Posts
Default

Carl is a beast. Taking mechanical measurements all over the automobile, and using professional equipment. Doing the Porsche aftermarket QC work when Porsche slipped in Zuffenhausen. Better be careful, GM could try and poach him. Porsche had better pay up!

Last edited by chance6; 06-06-2022 at 10:30 PM.
The following 2 users liked this post by chance6:
Art gt3rs (06-06-2022), jfr0317 (06-06-2022)
Old 06-07-2022, 12:17 AM
  #142  
User 81423
Burning Brakes
Thread Starter
 
User 81423's Avatar
 
Join Date: Apr 2019
Posts: 1,148
Received 574 Likes on 344 Posts
Default

Originally Posted by chance6
Carl is a beast. Taking mechanical measurements all over the automobile, and using professional equipment. Doing the Porsche aftermarket QC work when Porsche slipped in Zuffenhausen. Better be careful, GM could try and poach him. Porsche had better pay up!
haha agreed 🙌
The following users liked this post:
9914s (07-25-2022)
Old 06-07-2022, 12:18 AM
  #143  
4carl
Race Car
 
4carl's Avatar
 
Join Date: Jan 2004
Location: santa barbara
Posts: 3,865
Received 1,141 Likes on 609 Posts
Default

Originally Posted by chance6
Carl is a beast. Taking mechanical measurements all over the automobile, and using professional equipment. Doing the Porsche aftermarket QC work when Porsche slipped in Zuffenhausen. Better be careful, GM could try and poach him. Porsche had better pay up!
It’s called obsessive compulsive disorder OCD you think by the time I got to my age I’d be able to kick it. I will check and re-check things On my cars just to confirm something that most of the time just doesn’t matter. One of the things I pay a lot of attention to is alignment and chassis set up. Small changes can make a big difference in the way the car drives. Changing the toe from .015out to .030in Made a noticeable difference in the way the car tracks. Also changing the front sway bar from the middle position to full soft made the front and feel a lot less nervous and less busy.Carl

Last edited by 4carl; 06-07-2022 at 12:31 AM.
The following 2 users liked this post by 4carl:
chance6 (06-07-2022), cosmos (06-07-2022)
Old 06-07-2022, 12:45 AM
  #144  
n d
Pro
 
n d's Avatar
 
Join Date: Nov 2018
Posts: 570
Received 190 Likes on 106 Posts
Default

Originally Posted by Zero757
I don’t understand how they can say it is installed properly when it still does that. The gap between the two panels on my T is about 4mm…not even close to touching.
when the window is up all the way there is space the problem happens when I open my door.

Old 06-07-2022, 01:38 AM
  #145  
Mech33
Nordschleife Master
 
Mech33's Avatar
 
Join Date: Oct 2014
Posts: 5,371
Received 624 Likes on 382 Posts
Default

Originally Posted by n d
when the window is up all the way there is space the problem happens when I open my door.
If your glass is close to touching, I’d get it adjusted. It’s pretty straightforward.
Old 06-07-2022, 09:23 PM
  #146  
chance6
Race Car
 
chance6's Avatar
 
Join Date: Jun 2018
Location: Somewhere out East
Posts: 3,798
Received 1,500 Likes on 961 Posts
Default

Originally Posted by 4carl
It’s called obsessive compulsive disorder OCD you think by the time I got to my age I’d be able to kick it. I will check and re-check things On my cars just to confirm something that most of the time just doesn’t matter. One of the things I pay a lot of attention to is alignment and chassis set up. Small changes can make a big difference in the way the car drives. Changing the toe from .015out to .030in Made a noticeable difference in the way the car tracks. Also changing the front sway bar from the middle position to full soft made the front and feel a lot less nervous and less busy.Carl
I think the part about the front anti-roll bar should be broadcast from the rooftops...not sure everyone knows about this.

My OCD is after every time I get home, I feel underneath the front spoiler of my TTS to make sure I didn't scrape. I can't escape it. I also check the rear fenders for any abnormalities. I also check the side seat bolsters to ensure no damage. I know, it sucks.
Old 06-07-2022, 09:28 PM
  #147  
GrantG
Addict
Rennlist Member

 
GrantG's Avatar
 
Join Date: Jun 2002
Location: Denver
Posts: 18,029
Received 4,955 Likes on 2,806 Posts
Default

Originally Posted by chance6
I think the part about the front anti-roll bar should be broadcast from the rooftops...not sure everyone knows about this.
While I don’t doubt Carl’s result, keep in mind that softening the front bar will increase the aggressive turn-in that the car is known for at corner entry (could easily lead to unexpected oversteer).

For less experienced drivers, I think I’d be cautious about this mod.

If one was concerned about the resulting aggressive balance from a soft front bar but wanted to try anyway, I might suggest softening the rear bar at the same time to maintain more balance at the limit.

Last edited by GrantG; 06-07-2022 at 09:31 PM.
Old 06-08-2022, 12:11 AM
  #148  
4carl
Race Car
 
4carl's Avatar
 
Join Date: Jan 2004
Location: santa barbara
Posts: 3,865
Received 1,141 Likes on 609 Posts
Default

the change it very subtle its not like changing the springs. the softer bar will twist easier and absorb some roughness from a bump . it will also give more front grip and quicker turn in. I actually like the balance better but everybody has a feel that they like. My GT4 i played around with every combination of sway bar settings. ended up with full soft front and full hard rear. came from the factory f&r in the middle .. ive driven friends cars that they loved the set up and though they felt like sh-t to me.its not one size fits all...carl
The following users liked this post:
GrantG (06-08-2022)
Old 07-21-2022, 10:46 PM
  #149  
Danielgt3
4th Gear
 
Danielgt3's Avatar
 
Join Date: Jul 2022
Location: Miami
Posts: 4
Received 0 Likes on 0 Posts
Default Dealer issue with side glass

So champion Porsche is denying all warranty for the glass and claims that I did the damage. I would like anyone and everyone to email me that had the same issue so I can show them evidence it’s a common problem. Also if anyone had this covered my the dealer please let me know which dealer it was. Thanks
Old 07-22-2022, 09:04 AM
  #150  
Mr Mojo Risin
Racer
 
Mr Mojo Risin's Avatar
 
Join Date: Feb 2020
Location: Arlington, VA
Posts: 346
Received 191 Likes on 108 Posts
Default

Originally Posted by Danielgt3
So champion Porsche is denying all warranty for the glass and claims that I did the damage. I would like anyone and everyone to email me that had the same issue so I can show them evidence it’s a common problem. Also if anyone had this covered my the dealer please let me know which dealer it was. Thanks
Just forward this thread to them
The following users liked this post:
Danielgt3 (07-22-2022)


Quick Reply: Another lightweight glass broken - quarter panel



All times are GMT -3. The time now is 10:36 AM.