When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's pretty straight forward, just pull the stock **** from the boot, Place this one through the boot and tighten the set screw to the shaft then reattach the boot. I also put some Loctite Thread locker Blue 242 on it to be safe.
It feels so much better than the stock plastic shift ****.
It's pretty straight forward, just pull the stock **** from the boot, Place this one through the boot and tighten the set screw to the shaft then reattach the boot. I also put some Loctite Thread locker Blue 242 on it to be safe.
It feels so much better than the stock plastic shift ****.
Purchased a month ago from a fellow Rennlister, but just got refinished and finally mounted. HRE P101SC Frozen Polished Champagne - Mounted with 10mm spacers in rear, but thinking to go down to 5mm. I am in love with the color!
Purchased a month ago from a fellow Rennlister, but just got refinished and finally mounted. HRE P101SC Frozen Polished Champagne - Mounted with 10mm spacers in rear, but thinking to go down to 5mm. I am in love with the color!
Removed the Full body PPF over the past few weeks, and have been working on the paint correction. The color is so much clearer. super happy with the results