When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm confused about the whole tub thing. What's the difference? If it fits snug then anything inside will just slide around (even more so because of the plastic material) just like it would in the trunk. Won't it just minimize the actual functionality since anything taller than the bin won't fit anymore. Why open the frunk and a lid as well?
I have the bin so nothing will damage the interior of the frunk. The stuff I have in the bin is secured to prevent it from moving around. The lid is to have a cleaner look that opening the frunk and seeing all my crap.
I have the bin so nothing will damage the interior of the frunk. The stuff I have in the bin is secured to prevent it from moving around. The lid is to have a cleaner look that opening the frunk and seeing all my crap.
Yours looks very nice and neat, great job!
That's true.
I just could already hear my stuff flopping around in the bin when taking a corner lol.
Installed a top speed pro-1 center exhaust for my base 991.1 carrera. They told me I would be able to re-use my rectangular exhaust tips, which was not the case. Sounds ok, this is what my exhaust outlets currently look like without any tips. I am now searching for 991.1 PSE exhaust tips, or I think the 991.1 carrera S exhaust tips will fit as well? Have no idea how I will get them on since the tips from the side mufflers and the tips from this new exhaust are touching, and have no leeway at all….
Installed a top speed pro-1 center exhaust for my base 991.1 carrera. They told me I would be able to re-use my rectangular exhaust tips, which was not the case. Sounds ok, this is what my exhaust outlets currently look like without any tips. I am now searching for 991.1 PSE exhaust tips, or I think the 991.1 carrera S exhaust tips will fit as well? Have no idea how I will get them on since the tips from the side mufflers and the tips from this new exhaust are touching, and have no leeway at all….
Thank you all for your never ending flow of ideas and suggestions. I've had my 991.2 now for about a month, and here is what has happened (or is currently happening).
Almost all ideas from here.
OEM Clear LED Side Markers
OEM Logo Door Projector LEDs
OEM Silver Sports Gas Cap
OEM Valve Caps with Logo
OEM/CTEK Battery Maintainer with Eyelet
OEM Emergency Triangle with Holders (installed)
OEM Wiper Blades (extra set)
Rennline Phone Mount with Charging Cable
Kaizen Cup Holder Replacement for Ashtray
LidLiner Inner Frunk Hood Protector (the “missing factory part”)
SpoilerKing Thin Rear 1.25” Spoiler Lip (Black)
Red Frunk Liner/Box (HD) with Decal (thank you Rennlist)
Frunk Light LED Upgrade
USB Triple Switch Glove Compartment
Uniden Hardwire for R7 Radar Detector from Fuse Box
Garmin Mini-Dashcam with twin Harness from Fuse Box
Missing PDK Lock Trim Tool Replaced
Roadside Emergency Tire Patch Kit
Accident Warning Vest
Black Specialty License Plate with Slim Black Holder
Almost all reputable aftermarket center mufflers fit really well, so you might want to check for wiggle room in all the places.
I suspect you clamped the side mufflers too much towards the center.
You should be able to push them out a bit more. Also, the side muffler hanger brackets have a hinge, so you just need to loosen the bolts there and you'll have an easier way to adjust their position.
Originally Posted by mikescayenne
Installed a top speed pro-1 center exhaust for my base 991.1 carrera. They told me I would be able to re-use my rectangular exhaust tips, which was not the case. Sounds ok, this is what my exhaust outlets currently look like without any tips. I am now searching for 991.1 PSE exhaust tips, or I think the 991.1 carrera S exhaust tips will fit as well? Have no idea how I will get them on since the tips from the side mufflers and the tips from this new exhaust are touching, and have no leeway at all….
thanks for letting me know. @Silversun262 is hooking me up with the PSE tips that i need. When they come and i install them ill let you know how it went and show pictures of the finished product. I figured i would just have to loosen the side mufflers to get the clamp of the PSE tips on there then tighten them back up... then im assuming the new outlets coming from the center exhaust should just fit right in the back of the second outlet of the PSE tips.
Since the glove box only has one USB outlet, but my son uses at least five of them on each trip, I purchased a rotatable 1-for-3 switch/splitter on amazon. Fits perfectly and only set me back $7.
Absolutely worth it, especially since we also keep a jump-starter/powerbank connected for charging in the glove compartment.
03-10-2023, 03:51 PM
