When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For anyone interested, you can now order at B2 Prototech - I am going to make a separate post next week, but wanted to post here for those that have been following.
Would the custom option allow for a lower profile design? I have a manual and one of the testers highlighted how it interferes with your arm when driving/shifting.
Would the custom option allow for a lower profile design? I have a manual and one of the testers highlighted how it interferes with your arm when driving/shifting.
The issue is snapping over the open ashtray lid. The design is the absolute lowest it can be and still hold the charger puck, so unfortunately there's no place for it to go. I could potentially tip it more flat - and that may work, but the current design will take precedence for now just to get some shipped.
@brockbr-
Just a friendly reminder about an option for those of us who prefer a mount on driver's left side in sight line.
Thanks
Hey Brockbr-
Glad to hear you weathered the storm without too much damage.
When you get through the current production run, would appreciate what you can come up with for the non ashtray option.
Hey Brockbr-
Glad to hear you weathered the storm without too much damage.
When you get through the current production run, would appreciate what you can come up with for the non ashtray option.
I will be working on those next... I have a tester local to me for this exact purpose.
All orders that have placed are being fulfilled today. It's been tough to tell what quantities of which type to produce, and lo-and-behold the gt4 seems to be surprisingly popular, but I've got that covered too.