991.1 GTS modified with PICS
#31
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
WOW!!! That turned out way better than I was expecting, very well done my friend! Just the right amount of awesome added to that car. I wish I had seen it in person after this was done not before haha. Thanks for having me be a part of the build on the exhaust side, I can't wait to hear some more videos of your ripping the at WOT. Those revs are a tease to the true experience as we both know So what's next? Simply drive the car and enjoy it or do you have more plans?
Regards,
John Gaydos
Regards,
John Gaydos
__________________
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
#32
Rennlist Member
Thread Starter
WOW!!! That turned out way better than I was expecting, very well done my friend! Just the right amount of awesome added to that car. I wish I had seen it in person after this was done not before haha. Thanks for having me be a part of the build on the exhaust side, I can't wait to hear some more videos of your ripping the at WOT. Those revs are a tease to the true experience as we both know So what's next? Simply drive the car and enjoy it or do you have more plans?
Regards,
John Gaydos
Regards,
John Gaydos
John,
thanks for your help and patience through the decision process - I was afraid of it being too much but it’s perfect now. Still can’t believe how quiet it is with pse off.
Windshield replacement and paint correction with ceramic protection going on this/next week.
Filters and tune I believe is the next upgrade and I am swaying on the wheels. I sort of like the stock center locks but saw some rotiforms that are insane.
http://www.rotiform.com/gallery/2062...e-911-gt3-rse/
#33
Rennlist Member
This question might have been asked and answered. too many replies in this tread. I would like to know where to buy the front lower splitter/lip. I'm in the states. So far, I have been only able to find it from a company in UK. Also, I have sport design front bumper. From pictures appears to be same as the GTS. Just want to make sure this will fit a sport design bumper.
#34
This question might have been asked and answered. too many replies in this tread. I would like to know where to buy the front lower splitter/lip. I'm in the states. So far, I have been only able to find it from a company in UK. Also, I have sport design front bumper. From pictures appears to be same as the GTS. Just want to make sure this will fit a sport design bumper.
#35
Rennlist Member
That being said even a widebody rear bumper will fit a narrow body car.
The following users liked this post:
S65458 (10-28-2021)
#36
Hmm, Thanks for the info. Sorry for the misinformed comment.
#38
Rennlist Member
#39
Rennlist Member
Bumper and exhaust were done during the previous ownership. OEM GT3 Bumper and GT3 cup exhaust. I'm not sure what had to be modified or if the GT3 cup exhaust is a bolt-on.
Last edited by S65458; 10-28-2021 at 03:12 PM.
The following users liked this post:
noahabel (10-28-2021)
#40
Rennlist Member
Thread Starter
Well I am actually going to put on a gt3 front bumper here shortly (already purchased). I will be selling the front clip (entire bumper) with the upgraded lip and zunsport grills all included. I will be reusing my lights.
Debating on the gt3 rear bumper as well since I just purchased the gt3 rs side skirts.
Debating on the gt3 rear bumper as well since I just purchased the gt3 rs side skirts.
The following users liked this post:
noahabel (10-29-2021)
#42
Rennlist Member
Thread Starter
I cannot sorry - the side canards (dive planes) were glued on and will likely damage the bumper if I removed it. They are part of the lower lip.
#43
Rennlist Member
totally understand man. how much you want for the full bumper assembly?
off the topic, but what GT3 bumper you doing? .1 or .2 and where are you sourcing it from?
off the topic, but what GT3 bumper you doing? .1 or .2 and where are you sourcing it from?
#44
Rennlist Member
Thread Starter
Hey - I am going with 991.1 as I prefer the old school look and also wanted to keep my car period accurate.
I sourced one from eBay and got a good deal on it but will need to order quite a few oem parts to complete it.
Haven’t really put thought on pricing but send me a PM and we can work something out. I want to first make sure the replacement will work out and looks good before I sell this one. My project will be done once I get the rear diffuser sent to me (2-3 weeks more).
I sourced one from eBay and got a good deal on it but will need to order quite a few oem parts to complete it.
Haven’t really put thought on pricing but send me a PM and we can work something out. I want to first make sure the replacement will work out and looks good before I sell this one. My project will be done once I get the rear diffuser sent to me (2-3 weeks more).
#45
Rennlist Member