Putting OEM 991.2 GT3 front bumper on GTS OUCH!
#196
Rennlist Member
Thread Starter
ER
s
ER 2
Snapped some pics whilst up on the hoist.
Getting new rubber
Cup2-R ans GYEF1SS RS
#198
Rennlist Member
Thread Starter
#199
Rennlist Member
Michelin fronts aren't good enough? Why the cross-dressing?
#200
Rennlist Member
Thread Starter
To tell you the truth, it was a Major cluster f@ck.
I melted the metal cords of the rear 315/30/20 TrofeoR through the tread. Needed tyres fast. No stock.
They tell me they had 305/30/20. I say go. Order and pay.
Then i find out they are McLaren spec not Porsche. McLaren are narrower. Goodyear and Cup2-R only had rear in 21 inch. But just recently released 305 in cup2-R.
Howver not knowing this, had already ordered the GY fronts. Heard good things. Then when couldn’t get TriofeoR rear, was told of cup2-R, so got those. If i had of known i probably would have gone all cup2-R. However, a few mad men i track with melted them in one track day. PB’s yes, but one track day is expensive. I hope to get three days from GY.
I melted the metal cords of the rear 315/30/20 TrofeoR through the tread. Needed tyres fast. No stock.
They tell me they had 305/30/20. I say go. Order and pay.
Then i find out they are McLaren spec not Porsche. McLaren are narrower. Goodyear and Cup2-R only had rear in 21 inch. But just recently released 305 in cup2-R.
Howver not knowing this, had already ordered the GY fronts. Heard good things. Then when couldn’t get TriofeoR rear, was told of cup2-R, so got those. If i had of known i probably would have gone all cup2-R. However, a few mad men i track with melted them in one track day. PB’s yes, but one track day is expensive. I hope to get three days from GY.
#201
Rennlist Member
Thread Starter
I’ve finally found my ****!
Tyler APR
Swan Neck
This is by far the best setup I have seen.
And it balances off the Dundon front underbody Aero which i need in my life.
Dundon
Ladies and gentleman, the completed plan of my car is in my head.
Tyler APR
Swan Neck
This is by far the best setup I have seen.
And it balances off the Dundon front underbody Aero which i need in my life.
Dundon
Ladies and gentleman, the completed plan of my car is in my head.
#202
RL Community Team
Rennlist Member
Rennlist Member
Question on the 2 photos from last year. Did you end up utilizing the LED headlights? I hear the car cannot be upgraded to LED matrix if it's not originally equipped.
#203
Rennlist Member
Thread Starter
#205
Rennlist Member
Thread Starter
#206
Instructor
Good job on the whole car. This thread turned into something I didn't expect, but very entertaining to read. Let us informed about that wing. I love a good swan neck, if it serves a purpose and not for street cred
#207
Rennlist Member
Thread Starter
E-Motion goodies from Dundon
Just going to leave these beauties here.
MotorSport grade
E Motion LCA Carrera GTS
Non GT
Carrera LCA
MotorSport grade
E Motion LCA Carrera GTS
Non GT
Carrera LCA
#208
Rennlist Member
Thread Starter
Pole Position ABE
Changing my track seat from FIA to ABE.
The ABE is flared out slightly and takes the factory seat belt as well as the harness.
The BBI slider has failed. What a piece of ****. It has half an inch of play and rocks backward and forwards.
I’ll have to source a genuine Recaro slider. If that fails, then try and and get a Factory GT3 and use an adaptor.
I know i kill 380mm BBK and my car is fast, like you can’t imagine. But surely i can stop breaking seat mounts and sliders just from hard braking and cornering?
The following users liked this post:
Norge911 (02-04-2021)
#209
Burning Brakes
Pole Position ABE
Changing my track seat from FIA to ABE.
The ABE is flared out slightly and takes the factory seat belt as well as the harness.
The BBI slider has failed. What a piece of ****. It has half an inch of play and rocks backward and forwards.
I’ll have to source a genuine Recaro slider. If that fails, then try and and get a Factory GT3 and use an adaptor.
I know i kill 380mm BBK and my car is fast, like you can’t imagine. But surely i can stop breaking seat mounts and sliders just from hard braking and cornering?
I'll find out what we're using and let you know.