Putting OEM 991.2 GT3 front bumper on GTS OUCH!
#136
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I don’t think it will, I know it will.
No factory interference. You can set, adjust, change, delete everything.
The first thing to go is traction control. It is replaced with a true motorsport version.
I am thinking on adding motorsport ABS later as well. The MoTeC can even run my Tractive suspension better than my DSC module.
I will be adding port injection as well, before up grading the turbo’s. The Port injection will be so i can run 100% E85 with flex fuel.
No factory interference. You can set, adjust, change, delete everything.
The first thing to go is traction control. It is replaced with a true motorsport version.
I am thinking on adding motorsport ABS later as well. The MoTeC can even run my Tractive suspension better than my DSC module.
I will be adding port injection as well, before up grading the turbo’s. The Port injection will be so i can run 100% E85 with flex fuel.
This would be a game changer, i believe the GTS has tons of potential that just hasn't been tapped into yet. I would love to further discuss if you have free time shoot me a PM I'm very limited on what i can do as i just joined this forum ill share my draggy data with you and what we have done so far.
#137
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This would be a game changer, i believe the GTS has tons of potential that just hasn't been tapped into yet. I would love to further discuss if you have free time shoot me a PM I'm very limited on what i can do as i just joined this forum ill share my draggy data with you and what we have done so far.
COBB will continue to rule until, MoTeC.
i am Protuned and run 50/50 E85 and 98RON.
#138
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Heck yea man same here several 11.000 @ 130 on the street no prepped surface. 0-60 in 3.0 sec again street and 7.4 60-130 Protuned on MS109. my tunner said there is a ton left in it but he is working out the kinks of the 3 to 4 shift.
Car is has Sould Bypas Pipes and a BMC filter.....
#139
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Heck yea man same here several 11.000 @ 130 on the street no prepped surface. 0-60 in 3.0 sec again street and 7.4 60-130 Protuned on MS109. my tunner said there is a ton left in it but he is working out the kinks of the 3 to 4 shift.
Car is has Sould Bypas Pipes and a BMC filter.....
Car is has Sould Bypas Pipes and a BMC filter.....
Vektor Headers
Akrapovic Cats (300 Cell)
AMS Intercoolers
DSC Module
TrackTive Coilovers
IPD Plenum
BMC Filter
COBB PDK Tune
COBB Pro-Tune
Full GT3 Front end
PWR centre Radiator
Brembo GTS BBK 380 mm front and rear
Endless ME20 Pads
Castrol SRF brake fluid
Elephant racing Adjustable bars and spherical bearings
Semi Slicks
Harness Bar
Schroth Harness
PPF
911-R Stripes
Tinted / Blacked out sunroof
Vektor Turbo inlet pipes
Turbo Smart BOV's.
Next up, MoTeC ECU, Recaro Podium, Maybe Catless , Akropovic Exhaust, Then V-Band them all and up grade the turbo's. Port injection, Motorsport ABS. It never ends. It's an illness I know.
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
I've always been crazy, but its kept me from going insane.
#140
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nabil 3.0: I think my GTS was the first to exhibit the 3-4 shift flutter and your times and problems mirror mine.
11 sec 1/4 mile, 3 sec 0-60 and the same 3-4th shift issue with Cobb Pro Tune. There is certainly a table in there that is limiting the torque that Cobb cant figure out.
APR says they have a GTS Tune and to be honest, if they could solve the issue and produce the same massive numbers from Cobb, I would switch over.
However, they havent proven they can and no one has dyno tested AND real world shifted from 3-4th to see if the flutter still exists.
4 point 0 has 50k of additional performance parts and races his car. We are within 10ths of seconds of his car and arent running E85 so the law of diminishing returns starts to play at some point.
If the Motec ECU works, and I have no reason to think it wont, we still have the issue of having an ECU swap that will not accurately reflect the engine in the car.
Meaning, when we go to sell the car, the overrevs, engine on/off and a myriad of other details will not have been logged and I fear a buyer will think something shady has been done.
Looking for a real tuner who knows these tables to figure it out, but its been over a year and the only solution is to dial down the boost and torque numbers which kills the whole protune..
11 sec 1/4 mile, 3 sec 0-60 and the same 3-4th shift issue with Cobb Pro Tune. There is certainly a table in there that is limiting the torque that Cobb cant figure out.
APR says they have a GTS Tune and to be honest, if they could solve the issue and produce the same massive numbers from Cobb, I would switch over.
However, they havent proven they can and no one has dyno tested AND real world shifted from 3-4th to see if the flutter still exists.
4 point 0 has 50k of additional performance parts and races his car. We are within 10ths of seconds of his car and arent running E85 so the law of diminishing returns starts to play at some point.
If the Motec ECU works, and I have no reason to think it wont, we still have the issue of having an ECU swap that will not accurately reflect the engine in the car.
Meaning, when we go to sell the car, the overrevs, engine on/off and a myriad of other details will not have been logged and I fear a buyer will think something shady has been done.
Looking for a real tuner who knows these tables to figure it out, but its been over a year and the only solution is to dial down the boost and torque numbers which kills the whole protune..
#141
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg7.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/c4302186_7b1b_4195_ba9f_9e483f82b96a_beef4a1bf58fab830f2edb2ff2326b0d145660cc.jpeg)
Pro Carbon
Got this today.
Covid19 Sux big time. Tyres are hard to get. Wheels are impossible to get. Seat, September. Meaning we don’t know.
Never been a patient person. When i want something, now is always a good time for me. 🤣
#142
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg4.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/5d62bb10_dbc4_42bf_b55d_651864ea26d3_08437f06345360c31ac17360f9aaae7fe376f735.jpeg)
Under body Aero
I’m just going to leave this here..
Balancing off the front GT3 bar with the touring under body aero.
#143
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
NICE-glad to see someone else tackle the rear diffuser. I have successfully adapted to my car and it is awesome-if you need any tips or tricks check out my thread or let me know!
https://rennlist.com/forums/991/1179...carerra-t.html
https://rennlist.com/forums/991/1179...carerra-t.html
#144
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
NICE-glad to see someone else tackle the rear diffuser. I have successfully adapted to my car and it is awesome-if you need any tips or tricks check out my thread or let me know!
https://rennlist.com/forums/991/1179...carerra-t.html
https://rennlist.com/forums/991/1179...carerra-t.html
🤣🤣🤣
#145
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
How much money do you have in this project? Sounds like around 100k plus the msrp of your car!
Crazy but happy to see the progress reports. I am over here debating about spending 10k on wheels and suspension upgrades!
Crazy but happy to see the progress reports. I am over here debating about spending 10k on wheels and suspension upgrades!
#146
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My car retail was $345,000. A GT3 stripper is around $400. A GT3-RS $550,000. And a GT2-RS around $800,000.
So it really doesn’t matter if I get to $500K.
It’s still considerably cheaper than a 2-RS, and just as fast.
#147
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I was a skeptic at first but you converted me a while ago, to your ways. I question nothing at this point. Having a personal affinity for doing things the hard way! You're also properly thrashing your car and not just playing with it for the sake. The only question I have at this point is have the vektor headers contacted anything to date? I keep going back and forth on that. I don't mean to upset the cosmos with that question. I want headers for the subtle tonal tweak over tune/performance thresholds.
#148
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That won’t be a concern anymore as they have a newer revision that doesn’t hang low. It was only one side and it wasn’t much anyway.
I had an issue with the coating. So instead of me being without my car for months, they sent me a brand new set of the new design for free.
Great customer service. They sound great and make awesome power. Still one of my favourite mods.
I had an issue with the coating. So instead of me being without my car for months, they sent me a brand new set of the new design for free.
Great customer service. They sound great and make awesome power. Still one of my favourite mods.
#149
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg7.ibsrv.net/gimg/rennlist.com-vbulletin/1500x2000/f7d45eeb_b937_4aed_add6_d6dea710b7ae_6410ff6e7e90c94dc66d45c23fd18f9c6e988329.jpeg)
Bracket
![](https://cimg8.ibsrv.net/gimg/rennlist.com-vbulletin/1024x768/f6bac4d6_76ca_4af9_ba8b_b049fa57b9cb_836d87509fa2f00dc14cf2093a5380bfc38c17b1.jpeg)
My race mechanic guy is OCD.
#150
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Header holes? Love it. Does this custom bracket make it sit higher up? It otherwise seems that mod makes for some pretty low clearance, yes? Based on our other member who nicely installed that piece.