DSC Sport V3 Control Module
#811
Rennlist Member
You would just need to solder a new one of these onto your circuit board.
https://rennlist.com/forums/991/1101...module-55.html
Maybe a place like this?
http://starelectronics.ca/
Last edited by Joec500; 04-26-2024 at 06:23 PM.
The following users liked this post:
Zylinderkopfdichtung (04-28-2024)
The following users liked this post:
Zylinderkopfdichtung (04-28-2024)
#813
Rennlist Member
I would just go to any electronics repair shop, they should be able to resolder a new USB port onto the board. Like a place that does consumer electronics repairs (hifi etc)
You would just need to solder a new one of these onto your circuit board.
https://rennlist.com/forums/991/1101...module-55.html
Maybe a place like this?
http://starelectronics.ca/
You would just need to solder a new one of these onto your circuit board.
https://rennlist.com/forums/991/1101...module-55.html
Maybe a place like this?
http://starelectronics.ca/
The following users liked this post:
KP993 (04-30-2024)
#817
5th Gear
Join Date: Sep 2023
Location: Scottsdale, Arizona
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I just purchased a used DSC V3 with a 10/22 build date that was in a 981 GT4 and will be installing it in my 991.1. Do I need the 991.1 version of the RS file (which I believe is the latest calibration file)?