Notices
991 GT3, GT3RS, GT2RS and 911R 2012-2019
Sponsored by:
Sponsored by:

picture of your garage

Thread Tools
 
Search this Thread
 
Old 10-08-2022, 02:51 PM
  #5566  
mile2424
Rennlist Member
 
mile2424's Avatar
 
Join Date: Feb 2005
Posts: 1,650
Received 161 Likes on 56 Posts
Default

Originally Posted by TEXIGO
Ok, I read every page, took me about a month.
You guys have some incredible cars, homes, and garages.
Congratulations, I’m nowhere close to y’all.

For the white trash members such as myself, there’s hope.
You can do like I did and get the rennlist mega garage starter kit.





thanks to @mile2424 for the artwork. Great and easy to deal with. 👍
anytime! Happy to help another RL’er add some nice decor to their walls!
Old 10-08-2022, 07:28 PM
  #5567  
NSD991
Rennlist Member
 
NSD991's Avatar
 
Join Date: Mar 2015
Posts: 806
Received 370 Likes on 112 Posts
Default


Naturally aspirated noise makers!
The following 15 users liked this post by NSD991:
Apex Ace (10-10-2022), ash_schwin (10-10-2022), basil2000 (10-24-2022), cadster (10-09-2022), Diablo Dude (10-18-2022), EXFIB (10-11-2022), fijibubba (10-08-2022), Finlander (10-08-2022), heshalosny (10-11-2022), Phattymcgee (10-08-2022), RolandT (10-09-2022), RudyP (10-09-2022), sampelligrino (10-25-2022), SToronto (10-11-2022), TEXIGO (10-08-2022) and 10 others liked this post. (Show less...)
Old 10-08-2022, 10:37 PM
  #5568  
wkf94025
Rennlist Member
 
wkf94025's Avatar
 
Join Date: Dec 2019
Location: SF Bay Area, CA, USA
Posts: 855
Received 537 Likes on 248 Posts
Default

Why does that photo remind me of Ferris Buhler's Day Off???
The following 6 users liked this post by wkf94025:
928 GT R (10-20-2022), Apex Ace (10-10-2022), CaymanR99 (10-26-2022), Chris MI 987 (10-09-2022), RudyP (10-09-2022), vtgt (10-09-2022) and 1 others liked this post. (Show less...)
Old 10-10-2022, 12:17 AM
  #5569  
Apex Ace
Rennlist Member
 
Apex Ace's Avatar
 
Join Date: Jun 2008
Location: El Dorado Hills
Posts: 341
Received 376 Likes on 116 Posts
Default



The following 25 users liked this post by Apex Ace:
911Vintage (10-10-2022), 991C2S88 (10-10-2022), aparedes (10-15-2022), ash_schwin (10-10-2022), b46 (10-10-2022), basil2000 (10-24-2022), cadster (10-10-2022), Chris MI 987 (10-10-2022), CustomPerformanc (10-24-2022), Diablo Dude (10-18-2022), elwademd (10-10-2022), fijibubba (10-10-2022), Finlander (10-10-2022), Full Boost (10-12-2022), heshalosny (10-11-2022), Hyped (10-11-2022), JJT (10-13-2022), JPMD (10-12-2022), kmh0277 (10-10-2022), Rmlovett1 (10-10-2022), rocris120 (Yesterday), RolandT (10-10-2022), rominl (10-10-2022), sonorous (10-11-2022), Thrownaway (10-13-2022) and 20 others liked this post. (Show less...)
Old 10-11-2022, 07:49 AM
  #5570  
FLGT
Pro
 
FLGT's Avatar
 
Join Date: Dec 2013
Posts: 608
Received 73 Likes on 44 Posts
Default

Originally Posted by TexasPorschelover
Need a new espresso machine for my garage. Rocket R9one or La Marzocco GS3? Torn between the two.
Curious what you went with? I have a line on a nice used GS3 MP, but seems a bit more complicated than optimal for me.
Might go with La Marzocco Linea Mini instead - bit smaller and looks a bit simpler.
Old 10-13-2022, 01:31 PM
  #5571  
wkf94025
Rennlist Member
 
wkf94025's Avatar
 
Join Date: Dec 2019
Location: SF Bay Area, CA, USA
Posts: 855
Received 537 Likes on 248 Posts
Default

My Bendpak 2-post and 4-post lifts arrived yesterday. Ordered Monday, and in my driveway ~48 hours later. No supply chain issues there! Pouring concrete next week. Lifts should be operational by Halloween. Photos soon.
The following 3 users liked this post by wkf94025:
928 GT R (10-20-2022), Apex Ace (10-13-2022), fijibubba (10-14-2022)
Old 10-14-2022, 11:44 AM
  #5572  
TEXIGO
Rennlist Member
 
TEXIGO's Avatar
 
Join Date: Jun 2022
Location: Cen. Tex.
Posts: 794
Received 433 Likes on 254 Posts
Default

Well the @sonictoolsusa representative for my state called and wanted to know how I was enjoying my sample set.
I have his cell and he said to call anytime time if I have a problem, need, complaints or praise.

pretty nice service from a tool company with USA made tools.

* I have no affiliation with sonic tools, just impressed with the tools and company so far.
The following 3 users liked this post by TEXIGO:
928 GT R (10-20-2022), cadster (10-14-2022), fijibubba (10-14-2022)
Old 10-14-2022, 03:05 PM
  #5573  
Body In White
Rennlist Member
 
Body In White's Avatar
 
Join Date: Sep 2011
Location: California
Posts: 602
Received 375 Likes on 169 Posts
Default

You'll like the sonic tools. I have their MSS+ cabinets + full tool sets in both my storage shop and my home garage. The organization is first rate.
The following users liked this post:
928 GT R (10-20-2022)
Old 10-14-2022, 04:12 PM
  #5574  
TEXIGO
Rennlist Member
 
TEXIGO's Avatar
 
Join Date: Jun 2022
Location: Cen. Tex.
Posts: 794
Received 433 Likes on 254 Posts
Default

Originally Posted by Body In White
You'll like the sonic tools. I have their MSS+ cabinets + full tool sets in both my storage shop and my home garage. The organization is first rate.
Nice screen name and collection.


Old 10-15-2022, 01:59 AM
  #5575  
subshooter
Rennlist Member
 
subshooter's Avatar
 
Join Date: Jan 2016
Location: New Orleans, LA (NOLA)
Posts: 5,173
Received 2,226 Likes on 1,015 Posts
Default

Originally Posted by wkf94025
Been debating 2-post vs 4-post for a couple years now, and finally about to pull the trigger on 2-post. Storage is the more frequent use, but wrenching the more important use. Need to drop 996TT motor and gearbox this fall, for welding coolant lines and sending gearbox to CMS, so it's finally time. Over/under vehicles include the 996TT, GT3, and F-350 crew cab short bed. Too many toys and not enough storage capacity!
I don't normally hang out in this forum but I suggest you get the 4 post lift with a rolling jack. Best of both worlds. You don't want to store your car on a 2 post lift with the suspension dangling like that.

Here is a pic of my garage and also some pics of a a Turbo S being taken apart a couple of days ago on my lift (I helped a buddy of mine do a lot work on it).





Last edited by subshooter; 10-15-2022 at 02:04 AM.
The following 7 users liked this post by subshooter:
928 GT R (10-20-2022), Apex Ace (10-24-2022), elwademd (10-17-2022), EXFIB (10-15-2022), fijibubba (10-15-2022), fjpdds (10-29-2022), rocris120 (Yesterday) and 2 others liked this post. (Show less...)
Old 10-17-2022, 01:50 AM
  #5576  
wkf94025
Rennlist Member
 
wkf94025's Avatar
 
Join Date: Dec 2019
Location: SF Bay Area, CA, USA
Posts: 855
Received 537 Likes on 248 Posts
Default

Bendpak said the gap between the treads of the 4 post lift wasn't wide enough to drop a 911 engine and tranny. So I bought both: 4 post and 2 post. Arrived less than 2 days after ordering. Pouring concrete tomorrow. Lifts should be operational by Halloween.
The following 3 users liked this post by wkf94025:
928 GT R (11-03-2022), fijibubba (10-17-2022), rocris120 (Yesterday)
Old 10-23-2022, 11:18 PM
  #5577  
fjpdds
Rennlist Member
 
fjpdds's Avatar
 
Join Date: Sep 2004
Location: KNOXVILLE TN
Posts: 1,921
Received 67 Likes on 14 Posts
Default

Recently wrapped up a garage build. I enjoyed this thread and wanted to share back into it.

It includes a car port added as a ‘wash bay’ area. No news flash here but, what a difference it is having a place to wash the cars out of direct sunlight. Much more of a relaxing pace, not fretting over water spotting.

Back story my wife and I both lost long term spouses to cancer. We joyfully married one year ago. I sold my big lake house and moved to her country house on 10 acres of land. The house is a well designed one story farmhouse style
with an attached 2 car garage. I own 3 Porsche’s, so building an addition was planned immediately. Finally wrote the last check and ready to enjoy it all.

We converted one of the attached garage bays into a mud room with large finished closet, added a porch, breezways, and a driveway gate with fencing.

Used Premier garage to epoxy finish both garage floors and put in built-in cabinets. HVAC in new garage, landscaped and my wife picked several old reclaimed items to dress it up. Cooler door made in 1916 from a florist shop as man door, old car wheel light fixture, old shutters for water heater cover doors, and some other touches. Really pleased with the outcome.
A few before pics to start as we merged our stuff...























Last edited by fjpdds; 10-24-2022 at 10:20 AM.
The following 26 users liked this post by fjpdds:
928 GT R (11-03-2022), atlrvr (10-24-2022), b46 (10-24-2022), Burren (10-24-2022), cadster (10-24-2022), Chris MI 987 (10-24-2022), CustomPerformanc (10-24-2022), elwademd (10-24-2022), EXFIB (10-24-2022), Finlander (10-24-2022), Freier (10-24-2022), Full Boost (10-24-2022), heshalosny (10-27-2022), Hulley (10-25-2022), KoNy (10-25-2022), maplefrm (10-24-2022), NSD991 (10-23-2022), pdxjim (10-24-2022), sampelligrino (10-25-2022), sanyata (10-25-2022), sonorous (10-24-2022), spyderbret (10-24-2022), SToronto (10-28-2022), stpatsday (11-04-2022), TET GT3 (10-23-2022), Tom Pultz (10-24-2022) and 21 others liked this post. (Show less...)
Old 10-24-2022, 08:50 AM
  #5578  
Finlander
Rennlist Member
 
Finlander's Avatar
 
Join Date: Aug 2014
Location: Sunshine State
Posts: 1,078
Received 381 Likes on 142 Posts
Default

Originally Posted by fjpdds

It includes a car port added as a ‘wash bay’ area. No news flash here but, what a difference it is having a place to wash the cars out of direct sunlight. Much more of a relaxing pace, not fretting over water spotting.






Well done ...thanks for sharing.

I love having a wash bay as well and being able to wash a car pretty much any time of the day, or even at night with lights. My only challenge was the afternoon sun, so I added an electronic sun screen ...works great.




The following 14 users liked this post by Finlander:
928 GT R (11-03-2022), b0rderman (10-24-2022), Chris MI 987 (10-25-2022), elwademd (10-24-2022), EXFIB (10-24-2022), fjpdds (10-24-2022), ftc3 (02-24-2023), heshalosny (10-27-2022), itrsteve (10-25-2022), lax01 (10-24-2022), rocris120 (Yesterday), rominl (10-25-2022), SToronto (10-28-2022), stpatsday (11-04-2022) and 9 others liked this post. (Show less...)
Old 10-24-2022, 09:56 AM
  #5579  
EXFIB
Rennlist Member
 
EXFIB's Avatar
 
Join Date: Jul 2022
Posts: 112
Received 103 Likes on 41 Posts
Default

Originally Posted by Finlander
Well done ...thanks for sharing.

I love having a wash bay as well and being able to wash a car pretty much any time of the day, or even at night with lights. My only challenge was the afternoon sun, so I added an electronic sun screen ...works great.



This is one of the coolest setups I have ever seen.

Last edited by EXFIB; 10-24-2022 at 09:57 AM.
The following 4 users liked this post by EXFIB:
928 GT R (11-03-2022), fijibubba (10-31-2022), Finlander (10-24-2022), rocris120 (Yesterday)
Old 10-24-2022, 10:22 AM
  #5580  
fjpdds
Rennlist Member
 
fjpdds's Avatar
 
Join Date: Sep 2004
Location: KNOXVILLE TN
Posts: 1,921
Received 67 Likes on 14 Posts
Default

Thanks. That's beautiful and what a great idea!
Where can I get one?


Quick Reply: picture of your garage



All times are GMT -3. The time now is 01:11 PM.