Best Exhaust for a 991.2 GT3
#1036
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Question for those who have gone through several iterations of exhausts:
I picked up a used GRP and a used Sharkwerks rear delete when I got my GT3T last month. I love the volume and timber of the GRP and love the refined sound / better in cabin engine sounds not being drowned out by the Sharkwerks. With valves unplugged the GRP drone in the 2000-3000 rpm range is a bit much, but Sharkwerks has no drone with valves unplugged and I love the extra volume below 4K with the valves open.
Guess I’m going to ask the golden question here that has made this thread go on for 60+ pages: How do I get the volume/rawness of the GRP (it’s my preference) but some of the refined in-cabin engine sounds of the sharkwerks? I do like the Sharky with open valves throughout, just wish it could produce the sound of the GRP up top!
I know the answer is catted street headers but the local dealer i want to use for service seemed to indicate that would void engine warranty, and don’t want to push it until I get to know them.
Appreciate input from anyone who found themselves in my same situation (or just keep switching rears every few months LOL)...
I picked up a used GRP and a used Sharkwerks rear delete when I got my GT3T last month. I love the volume and timber of the GRP and love the refined sound / better in cabin engine sounds not being drowned out by the Sharkwerks. With valves unplugged the GRP drone in the 2000-3000 rpm range is a bit much, but Sharkwerks has no drone with valves unplugged and I love the extra volume below 4K with the valves open.
Guess I’m going to ask the golden question here that has made this thread go on for 60+ pages: How do I get the volume/rawness of the GRP (it’s my preference) but some of the refined in-cabin engine sounds of the sharkwerks? I do like the Sharky with open valves throughout, just wish it could produce the sound of the GRP up top!
I know the answer is catted street headers but the local dealer i want to use for service seemed to indicate that would void engine warranty, and don’t want to push it until I get to know them.
Appreciate input from anyone who found themselves in my same situation (or just keep switching rears every few months LOL)...
#1039
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
__________________
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
#1040
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My grandmother would have referred this as buying a pig in a poke.
#1041
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Maybe JCR is the answer for me, but valved race or silenced race? If anyone with a JCR can chime in with what type, how it would compare to a rear center delete if you ran one (what rear did you have and what JCR did/do you have)...
Wondering if I just need to try some side deletes with stock rear muffler -- would love if the volume of the exhaust is similar to a GMG or GRP or Soul out back (megaphone-type) BUT didn't dilute the engine sounds so much inside. I love the engine sounds in cabin with the Sharkwerks but can't hear the exhaust really at all valves open all the time until I hit 5-5.5K (for sure others can hear it). I also love the sound of the GRP for the exhaust note. That definitely can be heard! GRP off to get ceramic coated a different color...crack pipe...I hear crack makes everything better LOL...
Wondering if I just need to try some side deletes with stock rear muffler -- would love if the volume of the exhaust is similar to a GMG or GRP or Soul out back (megaphone-type) BUT didn't dilute the engine sounds so much inside. I love the engine sounds in cabin with the Sharkwerks but can't hear the exhaust really at all valves open all the time until I hit 5-5.5K (for sure others can hear it). I also love the sound of the GRP for the exhaust note. That definitely can be heard! GRP off to get ceramic coated a different color...crack pipe...I hear crack makes everything better LOL...
Last edited by rhk118; 10-04-2020 at 07:13 PM.
The following users liked this post:
rhk118 (10-04-2020)
#1043
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Maybe JCR is the answer for me, but valved race or silenced race? If anyone with a JCR can chime in with what type, how it would compare to a rear center delete if you ran one (what rear did you have and what JCR did/do you have)...
Wondering if I just need to try some side deletes with stock rear muffler -- would love if the volume of the exhaust is similar to a GMG or GRP or Soul out back (megaphone-type) BUT didn't dilute the engine sounds so much inside. I love the engine sounds in cabin with the Sharkwerks but can't hear the exhaust really at all valves open all the time until I hit 5-5.5K (for sure others can hear it). I also love the sound of the GRP for the exhaust note. That definitely can be heard! GRP off to get ceramic coated a different color...crack pipe...I hear crack makes everything better LOL...
Wondering if I just need to try some side deletes with stock rear muffler -- would love if the volume of the exhaust is similar to a GMG or GRP or Soul out back (megaphone-type) BUT didn't dilute the engine sounds so much inside. I love the engine sounds in cabin with the Sharkwerks but can't hear the exhaust really at all valves open all the time until I hit 5-5.5K (for sure others can hear it). I also love the sound of the GRP for the exhaust note. That definitely can be heard! GRP off to get ceramic coated a different color...crack pipe...I hear crack makes everything better LOL...
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
The following users liked this post:
rhk118 (10-06-2020)
#1044
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hope you're a neurosurgeon
....I have no idea what that would sound like! Although with the GRP valves open all the time I did hit a couple resonant frequencies with windows down where the cabin clearly was the speaker enclosure!
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
#1045
#1047
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey all.
I've been planning on an exhaust for a 911.1 GT3RS and after speaking to someone about Sharkwerks, I've been leaning towards that. I've been lookin around for a bit but when searching for it on a 991.1 RS and with the track exhause, I've only found one vid on youtube (driving Into the unknown) was the vid. Most of the vids I found with track sharkwerks were with other model 911 cars so I can't really base my decision off that. Does anyone have another vid with just the track exhaust and no other exhaust mods done to it on a 911.1 RS? Also, the price was around 2500.00 and as I understand it, It's all bolt on and doesn't pop up any codes once installed, which were also heavy deciding factors. When he told me it spits flames, I was like...really? lol Great way to sell me.
Thanks in advance.![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
I've been planning on an exhaust for a 911.1 GT3RS and after speaking to someone about Sharkwerks, I've been leaning towards that. I've been lookin around for a bit but when searching for it on a 991.1 RS and with the track exhause, I've only found one vid on youtube (driving Into the unknown) was the vid. Most of the vids I found with track sharkwerks were with other model 911 cars so I can't really base my decision off that. Does anyone have another vid with just the track exhaust and no other exhaust mods done to it on a 911.1 RS? Also, the price was around 2500.00 and as I understand it, It's all bolt on and doesn't pop up any codes once installed, which were also heavy deciding factors. When he told me it spits flames, I was like...really? lol Great way to sell me.
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
Last edited by timelessicons; 03-19-2024 at 09:20 PM.
#1048
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey all.
I've been planning on an exhaust for a 911.1 GT3RS and after speaking to someone about Sharkwerks, I've been leaning towards that. I've been lookin around for a bit but when searching for it on a 991.1 RS and with the track exhause, I've only found one vid on youtube (driving Into the unknown) was the vid. Most of the vids I found with track sharkwerks were with other model 911 cars so I can't really base my decision off that. Does anyone have another vid with just the track exhaust and no other exhaust mods done to it on a 911.1 RS? Also, the price was around 2500.00 and as I understand it, It's all bolt on and doesn't pop up any codes once installed, which were also heavy deciding factors. When he told me it spits flames, I was like...really? lol Great way to sell me.
Thanks in advance.![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
I've been planning on an exhaust for a 911.1 GT3RS and after speaking to someone about Sharkwerks, I've been leaning towards that. I've been lookin around for a bit but when searching for it on a 991.1 RS and with the track exhause, I've only found one vid on youtube (driving Into the unknown) was the vid. Most of the vids I found with track sharkwerks were with other model 911 cars so I can't really base my decision off that. Does anyone have another vid with just the track exhaust and no other exhaust mods done to it on a 911.1 RS? Also, the price was around 2500.00 and as I understand it, It's all bolt on and doesn't pop up any codes once installed, which were also heavy deciding factors. When he told me it spits flames, I was like...really? lol Great way to sell me.
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
__________________
![](https://rennlist.com/forums/signaturepics/sigpic65950_4.gif)
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
![](https://rennlist.com/forums/signaturepics/sigpic65950_4.gif)
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
#1049
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I love this thread - and all the opinions/experiences therein.
My 2 cents...
I've owned a 997.1 GT3 and 718 GT4 in the last 2 years. I've also previously owned a 991.1 GT3 whilst living in Germany and currently have a 991.2 GT3. I live in London.
I've tried multiple setups, but in my opinion - two best setups are either JCR or Dundon. I appreciate AWE is also a stellar option and one could argue Akra etc...horses for courses...but i will only focus on the two i have mentioned. (this is not to say the rest are not amazing in their own right)
Whilst having access to JCR here in the UK is very convenient and dealing with them/exchanging is a breeze - my experience was mixed.
On the 997 - the JCR was amazing...sounded like a Cup car when under load. I installed their back box and side deletes. The sound was amazing if not a bit too obnoxious. Slight drone on high gears/lower speeds, but overall great. Not noticeable power gains..but that could be because i am a noob.
On the GT4 - again with the JCR, i did the headers and link pipes setup first. Left the valves in/on, so i had a sleeper when driving slow/around town, but again - a screamer when it punched above 4k RPM. I then tried to add the back box - and HATED it within the first 5miles. The combo, for some reason, just does not work...way too loud and extremely droney! Got rid of this very quickly and the chaps at JCR were amazing in offering me a buy back option etc...
When i got my 991.2 GT3 few months back, i decided to try Dundon - also because of their racing pedigree and claimed power bump...but also cos of the flavour of sound it offered over a JCR.
I went for the headers, cats, backbox...was finally installed all yesterday. I took it for a spirited drive and MAN am i happy! Its quiet when needing to be, but gloriously generous when i want it to be. ZERO bloody drone! here i can feel the power bump....
Yes, its very pricey - but this is the best setup in my experience and i would not go with anything else.
My 2 cents...
I've owned a 997.1 GT3 and 718 GT4 in the last 2 years. I've also previously owned a 991.1 GT3 whilst living in Germany and currently have a 991.2 GT3. I live in London.
I've tried multiple setups, but in my opinion - two best setups are either JCR or Dundon. I appreciate AWE is also a stellar option and one could argue Akra etc...horses for courses...but i will only focus on the two i have mentioned. (this is not to say the rest are not amazing in their own right)
Whilst having access to JCR here in the UK is very convenient and dealing with them/exchanging is a breeze - my experience was mixed.
On the 997 - the JCR was amazing...sounded like a Cup car when under load. I installed their back box and side deletes. The sound was amazing if not a bit too obnoxious. Slight drone on high gears/lower speeds, but overall great. Not noticeable power gains..but that could be because i am a noob.
On the GT4 - again with the JCR, i did the headers and link pipes setup first. Left the valves in/on, so i had a sleeper when driving slow/around town, but again - a screamer when it punched above 4k RPM. I then tried to add the back box - and HATED it within the first 5miles. The combo, for some reason, just does not work...way too loud and extremely droney! Got rid of this very quickly and the chaps at JCR were amazing in offering me a buy back option etc...
When i got my 991.2 GT3 few months back, i decided to try Dundon - also because of their racing pedigree and claimed power bump...but also cos of the flavour of sound it offered over a JCR.
I went for the headers, cats, backbox...was finally installed all yesterday. I took it for a spirited drive and MAN am i happy! Its quiet when needing to be, but gloriously generous when i want it to be. ZERO bloody drone! here i can feel the power bump....
Yes, its very pricey - but this is the best setup in my experience and i would not go with anything else.
#1050
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi JabsZA,
I am in Surrey and also have the Dundon system.
Is your gt3 still under an extended warranty? If so, is your OPC aware and what have they said re the Warranty?
Thanks,
Mark
I am in Surrey and also have the Dundon system.
Is your gt3 still under an extended warranty? If so, is your OPC aware and what have they said re the Warranty?
Thanks,
Mark