The Official Boxster/Cayman Rim (Wheel) Showoff Thread!
#242
#243
Instructor
OZ 18"
I had them powder coated bronze. The metal flake ended up being really light. I like them, they are affectionately called shyt brown by my friends. 😒
I had them powder coated bronze. The metal flake ended up being really light. I like them, they are affectionately called shyt brown by my friends. 😒
Last edited by Zepper; 03-21-2023 at 02:41 AM.
The following users liked this post:
CAinCA (03-21-2023)
The following users liked this post:
CAinCA (03-21-2023)
#245
#246
Rennlist Member
You may want to check if 9" wide in the front is legal in autocross for a 981. For the 987, 8.5" is the widest legal size you can run in the front. Apex makes both sizes but the 9" is more common.
The following users liked this post:
jreifler (08-23-2024)
#248
Custom Ferrari 348/F355 Challenge by Speedline replicas. Built to the same specs as Boxster Spyder 19" wheels. Could have been a bit more aggressive with the offset but wanted to keep the ability to run my 18" Cayman SII wheels with 7mm spacers front and rear.
#249
Instructor
19” Carrera Classic
The following users liked this post:
sasilverbullet (08-22-2024)
#250
Yummy looking. Who made them?
#251
Augment Wheels. Not sure who they get to do the actual machining, but it sounds like its either in Taiwan or mainland China. Build and finish is impeccable. Their alloy centre caps are the cherry on top, the crests are better looking than what you get from Porsche. I like them so much I'm fighting the urge to have a lightweight design made up in magnesium in 18".
#252
Augment Wheels. Not sure who they get to do the actual machining, but it sounds like its either in Taiwan or mainland China. Build and finish is impeccable. Their alloy centre caps are the cherry on top, the crests are better looking than what you get from Porsche. I like them so much I'm fighting the urge to have a lightweight design made up in magnesium in 18".
The following 2 users liked this post by andy7777:
KrisA (08-24-2024),
sasilverbullet (08-24-2024)
The following users liked this post:
sasilverbullet (08-25-2024)