968 turbo rs replica
#665
Racer
The provisional entry list for Albi is on the net !!!! 25 cars including 17 Saloon Cars and 8 GT Classic ....... Free practice on Friday at the end of the morning, we will see more clearly on those present.
In GTC2, I am happy to find my team manager Gbf Racing-Team Sébastien Mathieu and his magnificent M3 GTR Evo.
In GTC2, I am happy to find my team manager Gbf Racing-Team Sébastien Mathieu and his magnificent M3 GTR Evo.
The following 3 users liked this post by gilbert83:
#666
Team Owner
Join Date: Oct 2009
Location: one thousand, five hundred miles north of Ft. Lauderdale for the summer.
Posts: 28,705
Received 212 Likes
on
153 Posts
^^oh yeah.
It's a good thing that someone has the resources and desire to keep this up.
Thanks for posting it all and keeping us lurkers connected.
btw, do you know roughly how many hp it makes at the (crank vs atw)?
It's a good thing that someone has the resources and desire to keep this up.
Thanks for posting it all and keeping us lurkers connected.
btw, do you know roughly how many hp it makes at the (crank vs atw)?
#667
Racer
Here are the power diagrams
#668
Team Owner
Join Date: Oct 2009
Location: one thousand, five hundred miles north of Ft. Lauderdale for the summer.
Posts: 28,705
Received 212 Likes
on
153 Posts
Thanks Gilbert. Very impressive.
The front of my torque curve of my V8, is naturally, rounder.
But, your flat torque curves is very similar to my LS which is (also) very flat,
(unlike the more peaky 427).
We are ~near the same HP; w/ my engine about just under 500 at the crank.
i'm running over-square as you know: 388c.i. 4.130 bore w/ 3. 622 stroke
w/ LS9 camshaft (which is a bit livelier albeit modest over stock).
I'm running ported LS3 heads, huge intake and throttle body, LS7 injectors,
long tube 1 7/8" headers, and Bosch GT2 pump.
CBM Motorsports in Fontana, CA performed the recent fine tuning.
i'm not keen to put the engine thru any more dyno tests.
just driving it a lot
The front of my torque curve of my V8, is naturally, rounder.
But, your flat torque curves is very similar to my LS which is (also) very flat,
(unlike the more peaky 427).
We are ~near the same HP; w/ my engine about just under 500 at the crank.
i'm running over-square as you know: 388c.i. 4.130 bore w/ 3. 622 stroke
w/ LS9 camshaft (which is a bit livelier albeit modest over stock).
I'm running ported LS3 heads, huge intake and throttle body, LS7 injectors,
long tube 1 7/8" headers, and Bosch GT2 pump.
CBM Motorsports in Fontana, CA performed the recent fine tuning.
i'm not keen to put the engine thru any more dyno tests.
just driving it a lot
Last edited by odurandina; 07-14-2020 at 07:48 PM.
#669
Racer
The meeting on Albi is over. A gasoline pollution problem hampered the performance of the 968 . The sides of a steel jerrycan corroded and particles left in the gasoline pipes.
Some views of the paddock team GBF Racing
The tests made us discover the problem of gasoline with a difficulty to go up in the RPM !!!
It was not possible for us to dismantle everything and we did both races adding new gasoline.
Return home and major cleaning work on the fuel system !!
Some views of the paddock team GBF Racing
The tests made us discover the problem of gasoline with a difficulty to go up in the RPM !!!
It was not possible for us to dismantle everything and we did both races adding new gasoline.
Return home and major cleaning work on the fuel system !!
#670
Racer
The first classification of the French Historical Circuit Championship is out. A counted test: Albi.
110 drivers scored points in GT / Touring. 6 GTClassic riders enter the top 50.
110 drivers scored points in GT / Touring. 6 GTClassic riders enter the top 50.
#672
Racer
Complete cleaning of the fuel circuit, the 3 pumps, the filters, and the tank.
The injectors are cleaned and tested
The reassembly work was finished, but we were surprised to see a new spark plug that no longer worked !!! Cylinder temperature 4 at 150 ° C, the others at 500 ° C ?????
Last job and everything is OK for the meeting on the Dijon circuit next week
The injectors are cleaned and tested
The reassembly work was finished, but we were surprised to see a new spark plug that no longer worked !!! Cylinder temperature 4 at 150 ° C, the others at 500 ° C ?????
Last job and everything is OK for the meeting on the Dijon circuit next week
#675
Racer
I chose Michelin to have a wider tire width. Front: 25 instead of 23 and rear 27 instead of 25.
I have 3 pumps. 2 "Facet" pumps ( low pressure) which feed the buffer tank and 1 Bosch high pressure pump which feeds the injectors
I have 3 pumps. 2 "Facet" pumps ( low pressure) which feed the buffer tank and 1 Bosch high pressure pump which feeds the injectors
The following 2 users liked this post by gilbert83:
odurandina (08-18-2020),
PegasusVoss (08-18-2020)