UK 964 Track Day Club
#183
Nordschleife Master
Thread Starter
#184
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry. A typo that I missed. My car. 964 with G-Pipe and decat. I still have the cat so I suspose I could get a garage to refit it for the track day if I am likely to fail the noise test. Or get one of those bolt-on silencers.
#185
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If your tail pipe is round, I would go for the decibel devil bung. It worked really well on Cheeksyboy's 964 and is a lot less hassle than re-fitting the cat.
Make sure you put it on before you go because they noise test you at the gate when you arrive.
Make sure you put it on before you go because they noise test you at the gate when you arrive.
#187
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My tip is also oval, but there's plenty of clearance on the top and sides to enable the decibel devil to slide down inside the tail pipe and take out some of the 'noise' from the exhaust. There are some pic of it fitted in my exhaust on page 6 of this thread.
Suggest you go to their website and take some measurements off your car and compare to their fitting guide.
http://www.decibeldevil.co.uk/content/fitting
It dropped my reading from 108db to 103db at Oulton a couple of months back.
I'm in no way affiliated to DD, but a happy customer who was able to get on track as a result!
#189
Burning Brakes
Join Date: May 2010
Location: London, United Kingdom
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Had same issue with DD as my exhaust is also oval shape. No chance it was going to fit. So returned it for refund. Didnt have an issue with Brands or Donington (ok small issue there). Mine measures about 101 on static as the nice chaps at the Nurburgring informed me of before black flagging the car at the entrance gate and not allowing us on..........
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
#190
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
For not considerably great expense it's possible to get a round tail pipe that would take the DD:
http://www.design911.co.uk/fu/prod69...k-Porsche-964/
http://www.design911.co.uk/fu/prod69...k-Porsche-964/
#192
Burning Brakes
Join Date: May 2010
Location: London, United Kingdom
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
pretty sure i just have the g pipe. I think Frank has decat and g pipe (though am sure he will correct that if wrong) and he measured 104DB static on same day
#195
Burning Brakes
Join Date: May 2010
Location: London, United Kingdom
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Apologies lads but have to pull out of rockingham Sunday. Fortunately jonny is allowing the full balance to be credited to the spa trip for next year ![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Have fun and can't wait for pics / video
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Have fun and can't wait for pics / video