Ealokens Porshe 951
#556
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I found a minor crack that leaken In my old fuel damper, and parts being 37 years old. I'd rather change than find it burning down.
The following users liked this post:
Noahs944 (07-16-2023)
The following users liked this post:
ealoken (07-22-2023)
The following users liked this post:
Noahs944 (07-24-2023)
The following users liked this post:
ealoken (07-28-2023)
#562
Three Wheelin'
Thread Starter
#564
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Bellhousing breakage - do you think it was a combination of the huge increase & torque with age & fatigue which caused it?
Is this a common issue with tuned 951's?
Tim
Is this a common issue with tuned 951's?
Tim
#565
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Don't think it's a common problem, but check your mount.
Erik
#566
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have filled my Mount with polyurethane and made a support brace to the side. It feels much better and it has saved my cv:s after the mod.
i recommend at least to fill the mount or get a Mount with rubber bushings, a completely solid one is terrible with noise in the cabin.
i recommend at least to fill the mount or get a Mount with rubber bushings, a completely solid one is terrible with noise in the cabin.
#567
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have filled my Mount with polyurethane and made a support brace to the side. It feels much better and it has saved my cv:s after the mod.
i recommend at least to fill the mount or get a Mount with rubber bushings, a completely solid one is terrible with noise in the cabin.
i recommend at least to fill the mount or get a Mount with rubber bushings, a completely solid one is terrible with noise in the cabin.
So I'll sell my gearbox with quaife diff.
The following users liked this post:
DLS (08-04-2023)
The following users liked this post:
968to986 (10-29-2023)