side mirror removal
#1
side mirror removal
hello everyone
quick question im removing the driver and passenger side mirrors and was wondering how to get the harness through the mirror assembly or where to disconect it in the door any info would be great pics would help too if any
thanks
quick question im removing the driver and passenger side mirrors and was wondering how to get the harness through the mirror assembly or where to disconect it in the door any info would be great pics would help too if any
thanks
#4
Nordschleife Master
Unfortunetly you do need to cut the harness off. I still wonder why Porsche did not make a connector inside the door to make life easier. I still havent hooked up my power mirrors, probably never will!
#6
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
Originally Posted by Techno Duck
Unfortunetly you do need to cut the harness off. I still wonder why Porsche did not make a connector inside the door to make life easier. I still havent hooked up my power mirrors, probably never will!
#7
Three Wheelin'
Originally Posted by PorscheDoc
You do not need to cut the harness if you have the correct tool to remove the pins from the plastic connector.
I am also surprised that the mirror connectors were populated as part of the same sub assembly as the mirror installation. They must have used a functional check of the mirrors opperation to verify the wiring.
....well it sort of makes sense, considering there were no optional mirror styles.
Trending Topics
#9
Rennlist Member
Hello, I was searching about how to remove my mirrors and came accross this thread and want to avoid cutting the wires if at all possible. Where is this white circular connector located?? Is it inside the mirror somewhere or is it inside the door panel??
#10
Wax On, Wax Off
Rennlist Member
Rennlist Member
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by motoxxxdeamon
Hello, I was searching about how to remove my mirrors and came accross this thread and want to avoid cutting the wires if at all possible. Where is this white circular connector located?? Is it inside the mirror somewhere or is it inside the door panel??
#11
Rennlist Member
Thanks! Is the pin/socket extractor tool a common tool that I can buy at Sears/Walmart/Autoparts store?? Is there a specific one that I will need for this job?
#12
l
#13
Instructor
Dear Tom,
Welcome to Rennlist! Unfortunately, the thread you referenced is over 10 years old so unlikely to have a response from the OP. However, the pins you are referring to do have a specific terminal removal tool. Also, make sure the lock is open on the terminal in order to release the pins. I have been looking at this set to purchase for home use.
Best of luck.
Steven
Welcome to Rennlist! Unfortunately, the thread you referenced is over 10 years old so unlikely to have a response from the OP. However, the pins you are referring to do have a specific terminal removal tool. Also, make sure the lock is open on the terminal in order to release the pins. I have been looking at this set to purchase for home use.
Best of luck.
Steven