For Sale is the Wolf 3D V4plus standalone Engine management system from my 86 944 Turbo. Included with the system is a Safegaurd Knock control unit, cam trigger setup, wiring harness, AFR/Knock display gauge, a-piller gauge dual gauge pod with shift light, intake pipe and filter and Bosch LSM11 Wideband sensor (the bosh sensor can be run in the factory crossover location)

The system was purchased from Bob at Random EMS and the harness was built by me. The fueling is setup for sequential firing and it uses the factory coil/distributor setup, TPS, Water temp sensor, air idle control valve, knock sensor. It ties into the factory harness and includes wiring to run the factory gauges (oil pressure, water temp, tach) and the turbo water pump. It is also setup to increase idle when the A/C compressor comes on. The shift light is programmable and run by the Wolf unit. The instrument cluster which is also included is the factory one from my car but with the boost gauge removed and a N/A gauge face installed. The odometer gear has also been replaced in it. I probably have about 10-15k of miles on this system and everything works as it should and I have all the documentation, software and the wiring diagram to go with it. The V4 plus system also has addition inputs and outputs that can be configured for other purposes. The system is capable of more than I was using it for and can do boost control and COP when configured correctly. To do boost control you would also need the solenoid valve as well. For the valve and setup, you would need to contact Bob at Random. He's been great to deal with and super helpful anytime I needed anything.