Koni Feeler
#1
Rennlist Member
Thread Starter
Koni Feeler
I have a set of rear Koni 8242 with 80 lb springs that I'm considering selling. I bought these a few years ago and finally go around to installing them this past year, but with the low profile wheels and rough WV roads, I've decided to go to a little softer set-up. These are in good shape, with just a little surface rust on the threads. I was just wondering what a fair price would be on this set (I can't seem to find what I paid for these and have no idea.)
#4
Rennlist Member
Thread Starter
From what I could find from searching, I think these were similar to the Escort Cup shocks. Since these only have 80 lb springs, I used the stock bolt and didn't have any issues.
#7
Rennlist Member
Thread Starter
I believe the inside diameter is 2.25. I honestly don't know how to remove the springs from these, so I may be better off selling these and getting a normal Bilstein or Koni set of shocks.
Trending Topics
#8
Race Car
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
Probably a stupid question, but with 2.25 ID springs you didnt experience any issues with the springs rubbing the trailing arms? I assume the hydraulics are in good shape and dont need a rebuild? What would you want for the set shipped to 78666?
#9
I'll pass since there's line jumpers here
#10
Race Car
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
Line jumper? I'm not sure what you mean by that...I just asked how much they would be shipped to me. i'm not trying to climb over you to get them if that is what you were implying. I may not even want them, like I said price dependent. I was planning on going bilstien coilovers in the rear, but for a good price i'll take the koni.
#11