3 Liter 16v Turbo build
#306
Three Wheelin'
Thread Starter
Well guys.. It was about time i would start to share some information again!
Intercooler is finished, intercooler piping is finished, bov is placed.
Ordered my VEMS, wiring harness along with it. Boost solenoid, controlled by the VEMS. Fuel lines have been put in place from front to back. (10mm inside)
Injectors are here, 2000cc Bosch EV14's.
So here some pictures: (the intercooler tubing has been cleaned and flattened)
Intercooler is finished, intercooler piping is finished, bov is placed.
Ordered my VEMS, wiring harness along with it. Boost solenoid, controlled by the VEMS. Fuel lines have been put in place from front to back. (10mm inside)
Injectors are here, 2000cc Bosch EV14's.
So here some pictures: (the intercooler tubing has been cleaned and flattened)
#307
No, I was just joking. Block is made to fight against much stronger forces than that of gravitation, so it will not bend due to gravitation - ever.
Also, this guy on youtube that seems to really know his machining, does alusil procedure on MB block that is very similar to 44 block and is using no deck plate.
Mercedes Benz Alusil Cylinder Conditioning - YouTube
Also, this guy on youtube that seems to really know his machining, does alusil procedure on MB block that is very similar to 44 block and is using no deck plate.
Mercedes Benz Alusil Cylinder Conditioning - YouTube
If he doesn't know the process, then no one does. I spoke with him on Monday and his background and experience is more than impressive. He's been doing Alusil since the Vega days and understands this probably more than anyone. He has a complete foundry and can fab any part. Not your average machine shop by any stretch.
He's very familiar with the 944 engine and will be doing my 3.0. He works on his terms and is not a quick turn. Won't mind waiting.
Last edited by lejams; 03-26-2015 at 12:13 AM.
#308
Addict
Rennlist Member
Rennlist Member
Great, happy to hear that. I watched most of his videos and always enjoy them. If I had the option, I too would trust him the job.
I did this exposing procedure this weekend on my block, and as far as I can tell, it came out great. I will have it measured before assembly to confirm, but it looks good.
I will post a writeup on the procedure here: https://rennlist.com/forums/944-turb...it-look-4.html
Dutch944: How is the build going? Looks like you are at 99%, post some updates
I did this exposing procedure this weekend on my block, and as far as I can tell, it came out great. I will have it measured before assembly to confirm, but it looks good.
I will post a writeup on the procedure here: https://rennlist.com/forums/944-turb...it-look-4.html
Dutch944: How is the build going? Looks like you are at 99%, post some updates
#309
Three Wheelin'
Thread Starter
Yeah i really have to do that..
Working on wiring harness now, made a fuel rail. Going to get my intake manifold finished next week so i can sandblast it and paint it.
After that it's finishing the wiring harness which will take quite some time!
Working on wiring harness now, made a fuel rail. Going to get my intake manifold finished next week so i can sandblast it and paint it.
After that it's finishing the wiring harness which will take quite some time!
#311
Three Wheelin'
Thread Starter
#312