Colorado Dyno Day! (updated, with video)
#24
Wax On, Wax Off
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 4 Likes
on
4 Posts
www.roguetuning.com
Josh has the AFM chip (A-tune) that integrates a MAP sensor, and a MAF setup (M-tune) which replaces the airbox, converts it to true MAF code, and is literally plug and play. can be installed in 15 minutes.
Proof of that, we did approx. 13 pulls yesterday at the dyno in an hour, and we even stopped halfway thru to remove the airbox and install the M-tune.
Josh has the AFM chip (A-tune) that integrates a MAP sensor, and a MAF setup (M-tune) which replaces the airbox, converts it to true MAF code, and is literally plug and play. can be installed in 15 minutes.
Proof of that, we did approx. 13 pulls yesterday at the dyno in an hour, and we even stopped halfway thru to remove the airbox and install the M-tune.
#27
God damn that is exciting to hear, can't wait for my 2.8 to get here and see what extra power comes up just from switching over to an M-Tune. Looking forward to tuning it too.
#28
#30
Addict
Rennlist Member
Rennlist Member
Good stuff Geoff, sorry I couldn't make the dyno day.
The numbers look good but I'm also interested in your impression of how it drives in the real world vs. your previous setup?
The numbers look good but I'm also interested in your impression of how it drives in the real world vs. your previous setup?